Search results

  1. Bad Night

    wheel spacers

    That's crazy . I have had a bunch of SD's , most in the early 2000's and I live in salty Ohio . Never had any rust issues . Sucks , it's a beautiful truck . I spray my wheel wells out with every wash and get them oil sprayed every fall . Either way the flares at least hide it for now . :lmao
  2. Bad Night

    New Member hello

    Yea , it lubes the injectors and I see a small mileage improvement with it . By the way , Welcome
  3. Bad Night

    Question Pre March 99 vs Post March 99 Hubs - Interchangeability?

    Do you have to swap brake rotors as well to use the new hub assembly ? I am getting ready to do this and was told I would . I need one new hub bearing assembly but the dealer doesn't keep the old style anymore . I really like factory parts and get really good deals on them so I want to stick...
  4. Bad Night

    truck is dead!!

    If both batteries load test good (unhooked and independent from one another)then check all battery connections , especially the grounds . If all is good there you will need to start looking for where the draw is . You can do this by removing fuses one at a time and testing with an amp probe to...
  5. Bad Night

    2000 PSD 7.3 Failed cont. test and buzz test

    Haha , that is what was happening on my 01 .
  6. Bad Night

    Question What did you do to your truck today?

    I hope you are kidding . Sorry if your not . Sorry you went from a real truck to a wanna be a truck when it grows up . :lmao
  7. Bad Night

    2000 PSD 7.3 Failed cont. test and buzz test

    One was a friends the other was one of mine .
  8. Bad Night

    2000 PSD 7.3 Failed cont. test and buzz test

    I found it tonight . The wiring harness was shorting out on the shock mount and killing # 5 injector . 2nd wiring harness issue in the last couple weeks .
  9. Bad Night

    2000 PSD 7.3 Failed cont. test and buzz test

    Ok so a friends 2000 7.3 started running and idling rough and has lost power . He already had the valve cover gaskets replaced (last week after this first started) I scanned it and did a buzz test and contribution test . It failed both . The buzz test I could hear a huge difference when it hit...
  10. Bad Night

    New Member New Girl Here from Pennsylvania!

    Glad to have you here . Nice ride .
  11. Bad Night

    01 7.3 won't start

    X2 on this . Unplug the fuel bowl heater . Replace the fuse and you are good to go . You can replace the element but don't really have to . Power to the pcm comes from this fuse as well , that's why the no start .
  12. Bad Night

    01 7.3 won't start

    Put the rest of the new o-rings on the other 4 injectors , jumped the gpr and ......................................... Woo Hoo , she's alive . I think the whole problem before was the broken wire .
  13. Bad Night

    smaller mirrors vs bigger ones

    I put 08 power fold / power telescope on my e99 . They look good and you can see way better in them .
  14. Bad Night

    01 7.3 won't start

    Originally Posted by toolmangary on Powerstroke Nation "Well ohming the harness will only work if the wire is 100% broke/warn through, you could have 1 strand of wire still making the connection and it will ohm OK. I had a truck that would buzz test OK but would not fire the injector, I keep...
  15. Bad Night

    01 7.3 won't start

    Yea after it is back together I am going to pull the idm out of my 99 and see if it matters . I bought a reman and have read a few posts of people getting bad ones .
  16. Bad Night

    New to Superdutydiesel from OR

    Good to have ya here . These trucks are addicting lol . Been broke since I found all of these diesel forums .
  17. Bad Night

    01 7.3 won't start

    I guess I should say it's in my garage and it's 60 deg. in there . But I know my 99 starts a little harder even in the warm if I don't let the glow plugs cycle
  18. Bad Night

    01 7.3 won't start

    The first time he ran a buzz test it would not do it . That is when the first two codes were pulled . That lead me to replace the idm . After replacing the idm those codes were no longer present but it pulled up the 1293 and 1294 .
  19. Bad Night

    01 7.3 won't start

    The hpop res. is full . I had a friend who is a diesel mechanic run a buzz test with his snap on scanner , I could here the injectors buzzing , i don't really know what he was looking for but that is when the 1293 and 1294 codes were pulled . Would a buzz test be considered incomplete if codes...
  20. Bad Night

    Trailer fault

    I just remembered when I had my 08 I hooked to a trailer of a friends , it was wired wrong , the trailer brakes I believe , I didn't really notice a problem while towing but started getting a trailer fault message after I unhooked it . In my case it was just a bad fuse . Did you test all of the...
  21. Bad Night

    01 7.3 won't start

    I ordered all new injector o-ring kits , and 4 glow plugs to replace the bad ones . The glow plug relay is bad as well so I am going to replace it . Do you guys think any of this is relevant to it not starting . Will bad injector o-rings cause a no start condition ? The injectors ohm out at 2.8...
  22. Bad Night

    01 7.3 won't start

    The wait to start light comes on ,and just to be safe I checked all fuses , with a tester . It will rattle a little with ether but not really fire . I don't know what it should do off of ether .
  23. Bad Night

    Trailer fault

    Hmmm , I got nuthin . Possibly the integrated controller is just bad .
  24. Bad Night

    01 7.3 won't start

    I have an 01 7.3 I got as partial payment for a job . I drove it home . It was running great . The truck had sat for about 3 or 4 months . It was full of fuel . I took it home , drained the tank . Put 5 gal of new diesel in the truck . I drove it to the gas station and filled it up with diesel ...
Top