Search results

  1. JimmyDee

    Edge module problems

    I think big rooster is telling you right. My J/A is adjustable for defueling for shift, low boost pressure and exhaust temp. I am sure they all will defuel with the program. Jim
  2. JimmyDee

    how to trick the PCM?????

    Like has already been said, what is gained by installing the resisters. It will add the current that is saved by using the LEDs. They will draw .6 amps @ 12 volts and get hot. Other than the LEDs may last longer, nothing will be gained by doing this. If they really are needed to make the tranny...
  3. JimmyDee

    New Rotors

    ARTs are great. Cryo Treated & Slotted. Applied Rotor Technology Jim
  4. JimmyDee

    2 Stroke Oil Works!!!

    This is one thing I know for sure that you don't want to do with the new injectors. Water going through them will bring them to a short life. Jim
  5. JimmyDee

    Thanks all, it has been grand.

    I was going to comment on this but this statement kind of says it all. Jim
  6. JimmyDee

    STACKING CHIPS

    Here is the 10 k mod. It will add several HP to your engine. This diagram has the added feature of having a transistor that turns the mod off when at idle to make the idle smooth. Yes, it is an easy to do and cheap mod. Jim
  7. JimmyDee

    Have a great LONG weekend!

    Ya know, since I retired, every week end has been long and great. :thumbs
  8. JimmyDee

    Looking for F350 rear blocks

    I am fairly sure that the shocks will bottom out before hitting the shock stops. They are a tad bit long if you go from the 4" to the 2" blocks. I think you will need the Motorcraft CK05TIC which are 1 3/4" shorter. I installed Rancho's and they didn't have, at that time, a shock that would be...
  9. JimmyDee

    Bypass Filter by Racor

    This is a good picture of how to do the job. Feed on the left and return on the right.
  10. JimmyDee

    Make your Internet Browser Much Faster.

    I just did this modification and already had the 2 new dwords named "MaxConnectionsPer1_0Server" and "MaxConnectionsPerServer" They already had a value of 4. I am using Firefox 2 and added the FasterFox add on some time ago. I wonder if that add on gave me these settings. I changed them to 32...
  11. JimmyDee

    NOOB Question about rear differential type

    Unless it was changed, the stock and only ratio on a F250 of your year is a 3.73. Jim
  12. JimmyDee

    POR 15 on Oil Pan

    You do understand this is an $1800 + job because the engine has to be pulled to change the pan? I will be doing the POR 15 treatment next week and from everything I have read, it is a good fix for the oil pan. Jim
  13. JimmyDee

    Changing rear brakes

    Compress on the rear just like the front on my 2001. Jim
  14. JimmyDee

    Trans temp question.

    The guys that are seeing 225 and up should be using synthetic ATF. It will withstand a full 100 degrees F higher temperature without degrading. I have seen 185 once while towing my fiver. Jim
  15. JimmyDee

    2 Stroke Oil Works!!!

    I have tried it also @ 1 qt per tank and it does make the engine run a little quieter. Another thing I was thinking about is there is a fuel value to the oil so I think the gal of oil will also replace a gal of #2 and there by bringing the added cost of the oil down to $5 a gal. This is after...
  16. JimmyDee

    Virginia Tech Shooting............

    I would have to disagree with this statement. This jerk and his mother are going to be the cause of someone else becoming the next shooter. Coming from a high school teaching background, I've seen the first hand results of what the bullies can do to destroy a good kid. To the point that they...
  17. JimmyDee

    Q on brakes and rotors

    Wow! A $1000 for a brake job. I purchased, what I concider the best of the best rotors and pads from ART and paid $400 for them. Rear pads with a new (rebuilt) caliper was $125. So it looks like I made about $150-$200 an hour for my work. Not bad for an old man that is slow. Find a book on how...
  18. JimmyDee

    Expedition in 110mph police chase

    First of all, doesn't the X have a speed limiter @ about 90 mph? I can't believe the cops are being blamed for this idiot's bad decision to run from the cops with her baby in the car. It sounds like they tried a lot of tricks to stop her that didn't work. Why do people not take responsibility...
  19. JimmyDee

    Hutch mod. Let's bat this around a bit.

    This is right from ITP's site. "Additionally, any air "bubbles" that may develop in the fuel system can pass through the heads and out the regulators return port to the tank," I think you have misread something somewhere. Jim
  20. JimmyDee

    Brake problem, got any ideas??

    Why don't you try something first. I was having a pulsing feeling but it didn't really feel like pulsing. It was a different feel. I have the ARTs on my truck and wasn't happy with what I thought was an early failure. So I followed the instructions, and re seated them. This consisted of 10, 60...
  21. JimmyDee

    5w40?

    Every winter since it was new(2001) and year round for the last 2 years. I think it is great. Using Delvac 1. Jim
  22. JimmyDee

    Disgruntled Employee's final words(Photos)

    Now he gets to sit in jail and pay back for all the damage. Really smart. Jim
  23. JimmyDee

    Blood pressure went through the roof.

    Back years ago when I was in great shape, the same thing happened to me all the time. I found that Sodium Nitrate which is use as a lunch meat preservative caused it. I don't do lunch meats or any thing with that in it if possible. Jim
  24. JimmyDee

    Should ART Rotors warp?

    Here it the link for the bedding procedure. http://www.dieselmanor.com/docs/ART%20Installation%20Notes-R3.pdf I did this some 2 years after installing them and putting several thousand miles on them. Last summer I thought my rotors were warped (really bad) but they just needed to be bedded...
  25. JimmyDee

    Should ART Rotors warp?

    Don't turn them yet. I thought I had the same problem but they were not warped. Try this first. Do 10, 60 mph to 10 mph stops right in a row just short of locking the brakes. They will smoke and smell but what it does is seal the rotor some how. When letting them cool, don't stop for a few...

Members online

No members online now.
Total: 651 (members: 1, guests: 650)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top