Search results

  1. F

    Running like its cold but I know its not?

    Can someone tell me exactly how to disoconnect the EBP valve the easiest way? I see the valve but can't seem to reach under it. Thanks!
  2. F

    Running like its cold but I know its not?

    KC Northland, by the airport. Would trouple with the PCM cause this. I hooked up at Bullydog chip to it yesterday and all the truck would do is crank but never turn over with the chip in. After removing the chip the truck ran fine. Could something have happened after turning the truck off...
  3. F

    Truck just cranks, never turns over

    It's a 6-position chip but I have no way to download anything to the chip Thanks!
  4. F

    Truck just cranks, never turns over

    Yes it ran before installing the new chip
  5. F

    Truck just cranks, never turns over

    Yeah, even with the chip out it won't start...just cranks
  6. F

    Running like its cold but I know its not?

    Yes I am getting an SES light but I don't know anyone with a programmer so I can't read the code Thanks
  7. F

    Truck just cranks, never turns over

    A friend of mine hooked up a chip to his truck, now the truck just cranks but never turns over. What do we do? Thanks!
  8. F

    Running like its cold but I know its not?

    Can anyone give me specific instrustions to tell if the EPV is stuck, and exactly where its located?
  9. F

    Running like its cold but I know its not?

    I went out warm it up, hoping that she was just cold last night and actin up. I let it warm up today for about 15 minutes, tried backing out of my driveway with no luck. Even with the pedal to the floor the RPM's stay below 1K and she doesn't have the power to back out of the driveway. Thanks!
  10. F

    Running like its cold but I know its not?

    I went out and checked the fuel bowl, it's full and not gelled at all. thanks!
  11. F

    Running like its cold but I know its not?

    I'm Kansas City, it's about 30 degrees here. Thanks!
  12. F

    Running like its cold but I know its not?

    I haven't checked the fuel, but it's driven just fine in much colder weather. I imagine it's fine. Thanks!
  13. F

    Running like its cold but I know its not?

    Not the CPS, I can keep it running if I keep on the throttle. Thanks!
  14. F

    Running like its cold but I know its not?

    My truck's running like its cold, ie: extremely rough idle, dies, no power even with go pedal floored. I know it's not cold because I drove it no more than a couple hours ago and it's been plugged in since I got home. Please help!
  15. F

    Hard Steering

    I just went out and checked the tension on the belt; it seems alright to me
  16. F

    Hard Steering

    Not too long ago I replaced my PS pump due to hard steering as well as horrible noise when turning and braking. Now my steering is just as bad as before but my brakes are fine. I do have a slow flud leak but I've kept on top of it so I'm pretty sure the new pump isn't burnt up, and I think the...
  17. F

    Bully Dog 6pos?

    I installed the BD and all my truck does is crank, never turns over. Assuming my contacts are clean does this mean the chip doesn't work on my truck? Thanks!
  18. F

    Bully Dog 6pos?

    Well I just bought the BD, I'm sure this is a really stupid question but the knob seems to have 11 positions instead of just 6. What's the deal? Thanks!
  19. F

    Bully Dog 6pos?

    I'm gettin ready to buy a Bully Dog 6pos chip from a guy, however I really wanted to buy a TS. Can you guys tell me what the difference is or if I'm gonna be disappointed with the Bully Dog? Thanks!
  20. F

    Birthday Present

    If ya didn't end up gettin those Recon cab lights you were expecting, I've got quite a few sets I fell into that I'd like to sell at a good price. That goes for anyone else too!
  21. F

    Maxxis Buckshot Mudders

    Hey guys, I'm gettin ready to order some 315-75/16 Maxxis Buckshot Mud Tires. From what I can tell this is the biggest I can put on the ol' girl with just a leveling kit. What are your thoughts on the tire as well as the size? Thanks!
  22. F

    Truck won't start! Problems with ignition

    I ended up drilling it and screwing in this threaded awl looking thing I found in my garage; pulled right out! Thanks again guys!
  23. F

    Truck won't start! Problems with ignition

    Thanks a lot for all your help guys, I really appreciate it. Looks like I'm gonna be strugglin with it for a while or I'll end up callin a locksmith. Thanks!
  24. F

    Truck won't start! Problems with ignition

    The main problem with getting the broken piece out is that it broke off when I was turning the igniton so the inner "barrell" is turned and doesn't line up with the stationary piece so it won't simly pull out and there isn't a mm of space around the broken piece to grab onto it with pliers or...
  25. F

    Truck won't start! Problems with ignition

    Any suggestions on how to get the broken piece of metal out of the ignition? Thanks!

Members online

Total: 348 (members: 3, guests: 345)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top