Search results

  1. 4

    6.0 with overheating issues

    Is this offered at Ford Dealerships????
  2. 4

    6.0 with overheating issues

    From what I have read the coolers on the 03 (the round ones) are the better ones (instead of the square ones) and if I had a leak I would see liquid inside the EGR housing. I removed, and replaced the EGR and looked inside there but found no liquid. Now I am not saying that it is not a cooler...
  3. 4

    Newb in Southern California

    Welcome to SDD from San Diego. I recently purchased a F250 with a 6.0L. Lots of learning.
  4. 4

    Newbie In MA

    It looks like you are taking care of your new toy. Welcome to SDD
  5. 4

    New owner In Illinois

    Welcome to SDD. Now you get to have fun playing in the snow and mud
  6. 4

    Fng

    You will have a long time for any mods you are thinking about. Do the research. Welcome to SDD
  7. 4

    new to the forum

    Welcome. Good to see you found SDD
  8. 4

    Newbie wat up

    Welcome to SDD.
  9. 4

    Finally getting my power stroke

    Don't forget the dumb question is the one that you did not ask. I have asked a good number of questions here. Learned a lot. Welcome
  10. 4

    Hello all!

    Welcome to the Forum.
  11. 4

    Hey from KS

    Nice rigs. I recently purchased a Superduty to tow my Jeep Wrangler. A vast of knowledge here on the forum
  12. 4

    New Member Hi

    Welcome to the forum.
  13. 4

    6.0 with overheating issues

    Okay I finally got some pictures of what my truck is doing. I can not figure out why the temp/pressure is getting high enough to pop off the pressure side of the degas cap. I can not find any other leakage and it is obvious that it [coolant] is coming from the cap. I already replaced the...
  14. 4

    6.0 with overheating issues

    I am still waiting for someone to chime in on this...
  15. 4

    degas cap leaks

    regretfully no. I did not know the tool requirement or procedures. \ Input....
  16. 4

    6.0 with overheating issues

    All work has to be completed UNDER the truck and you will have to do some reaching but it is not all that difficult. There are two bolts holding on the heat shield above the bell housing (under the turbo). I can't remember if they were 1/2" or 9/16". The size wrench needed to remove the ICP...
  17. 4

    Oil dipstick cracking

    Great Mod...
  18. 4

    degas cap leaks

    I did get the lower level indicator bottle. My first (cracked) one showed a higher MAX/MIN level. I will try to get a picture of it in the near future. As I indicated in past posting after replacing the degas bottle and cap I have been getting high pressure over-flow, brown color antifreeze...
  19. 4

    6.0 with overheating issues

    Not sure about the over-heating issue. But I had to replace my ICP and, after reading a number of forums, I found it much easier to remove and replace the ICP. In most of the forums it required the air filter to be removed but I think that just removing the heat shield, and cutting my wrench in...
  20. 4

    New head studs

    Agreed......:clap: I am glad you re-read the start of this thread. Fraud it is.
  21. 4

    quickie coolant question

    This is good news. The only thing that concerns me is that I conducted a engine flushed and and installed green antifreeze. The green color lasted for a couple weeks and faded to rust again. It is not "black" or carbon colored but brown rust color again. I am thinking about flushing it again and...
  22. 4

    quickie coolant question

    So is "rust" color coolant bad?? Even if I smell the antifreeze in the liquid. I have read people call coolant as "black" if the cooler leaks carbon from the diesel ...Same thing???
  23. 4

    Help Needed not charging, need help

    I had to replace my batteries to fix the same issue.
  24. 4

    degas cap leaks

    I replaced the EGR and did not see any liquid inside. I don't see white smoke. I will have to check out the EGR cooler though to make sure. I agree with you on this one.
  25. 4

    Matching Parts

    I was looking to replace the door panels with power windows/locks, side mirrors with side markers. My truck offered some options that come on the XLT but not all.

Members online

Total: 570 (members: 2, guests: 568)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top