will a motor out of a school bus work

pawsranch3

SDD Junior Member
Joined
Oct 1, 2006
Messages
29
Reaction score
0
Location
oklahoma
i have access to a lower mileage 7.3 powerstroke motor out of a school bus. this motor is currently in a pickup truck with a bad transmission but the owner said that i can have it. will this work in my 2000 psd
 

Wingdog

Full Access Member
Joined
Jan 15, 2007
Messages
226
Reaction score
0
Location
Thunder Bay, Ontario
If it is a 7.3L powerstroke it will fit just fine. I don't imagine they made the bell housing mounts any different for a bus. He already has it in a truck so it should go back in one. :sweet
 

JLDickmon

ursus combibo
Joined
Jun 22, 2006
Messages
4,173
Reaction score
12
Location
49041
do the years matter? or as long as it is a 7.3 powerstroke will it work

the '99 - '01's are reputed to be the stronger engines... there is a known serial number split where they went to "powdered metal" rods instead of forged, and they are allegedely "blow up" prone..
 

pawsranch3

SDD Junior Member
Joined
Oct 1, 2006
Messages
29
Reaction score
0
Location
oklahoma
but if this is a 94.5- 97 7.3 powerstroke will it work in my 2000, i am not too sure what year this schoolbus was
 

bushpilot

Full Access Member
Joined
Aug 2, 2005
Messages
5,815
Reaction score
4
Location
Tomball
man if youre gonna do this consider installing a new oil pan or at least
inspect the hell outta the existing one....theyre rust <thru> prone...
and the only way to replace 'em is to pull the engine.
 

pawsranch3

SDD Junior Member
Joined
Oct 1, 2006
Messages
29
Reaction score
0
Location
oklahoma
this motor is out of a schoolbus that is sitting over at my friends house the but has less than 100k miles on it and has been maintained by the local mech. here in town. i dont know the year until tomorrow but if it is a 94.5- 97 will it still work?
 

94f450sd

certified nutjob
Joined
Oct 13, 2005
Messages
2,323
Reaction score
0
Location
plymouth,ma
any year powerstroke will fit.just have to change certain parts.

comeing from a bus you will need to swap the oil pan,flywheel,trans adapter,exhaust manifolds/uppipes,possibly the oil cooler,HPOP reservoir,water pump unless you read the directions on converting your truck to run the IH pump with the coolant filter,bottom pully and all accessories and brackets.possibly the turbo or the compressor housing and intake Y pipe.and some sensors here and there as well as the passengers side valve cover.
 

Members online

No members online now.

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top