Vibration noise

02Oilburner

SDD Power Hungry
Joined
Dec 20, 2007
Messages
596
Reaction score
10
Location
Raleigh, NC
l'll have to check all of these spots for rubbing the exhaust. The old girl made it 1200 miles to Richmond MO to visit family! The vibration noise was not really there after 72 MPH! We are having snow today so we will have a white Christmas again this year! Hope you all have a Merry Christmas!
 

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
l'll have to check all of these spots for rubbing the exhaust. The old girl made it 1200 miles to Richmond MO to visit family! The vibration noise was not really there after 72 MPH! We are having snow today so we will have a white Christmas again this year! Hope you all have a Merry Christmas!

;tu

When you get to it.. along with whats been mentioned.. you could also check your I/C pipes.. on the drivers side, wiggle it a bit... yul be able to find/feel where it might be touching something.

On the passenger side.. it can tend to hit/rub on the A/C dryer bracket.

Again.. the contact can happen when the engine torques over.

Might be time for New I/C boots... they tend to get soft & saggy.. with time & miles ?

Have a good Holiday.

Joe
 

JRJ04

Senior Member
Joined
Jun 18, 2007
Messages
1,737
Reaction score
4
Location
Houston, TX
rather than starting another thread, I'll just piggyback on this one.

I've got a vibration that comes like clockwork at 2500rpm's and above, regardless of load, chip setting, speed, road conditions etc.

Here is what I have done in an attempt to alleviate the problem (some of it was done for other reasons than the vibration).

1. All injectors have been replaced (they needed to be, and this eliminates it being a miss in the motor)

2. Driveshaft has been rebuilt (new u joints, carrier bearing, and high speed balanced)

3. Got under there and saw the exhaust was rubbing the crossmemeber (for sure thought that was the problem) and tweaked it all to get to to clear.

4. Also saw that the exhaust was too close to the heat shield...couldnt tweak it enough, so i just trimmed the shield to get it to clear.

I cant tell where else the exhaust could be rubbing....what else could this be? It's driving me nuts...
 

rammertide07

Full Access Member
Joined
Jan 19, 2010
Messages
1,206
Reaction score
0
Location
Rogersvilles, AL
rather than starting another thread, I'll just piggyback on this one.

I've got a vibration that comes like clockwork at 2500rpm's and above, regardless of load, chip setting, speed, road conditions etc.

Here is what I have done in an attempt to alleviate the problem (some of it was done for other reasons than the vibration).

1. All injectors have been replaced (they needed to be, and this eliminates it being a miss in the motor)

2. Driveshaft has been rebuilt (new u joints, carrier bearing, and high speed balanced)

3. Got under there and saw the exhaust was rubbing the crossmemeber (for sure thought that was the problem) and tweaked it all to get to to clear.

4. Also saw that the exhaust was too close to the heat shield...couldnt tweak it enough, so i just trimmed the shield to get it to clear.

I cant tell where else the exhaust could be rubbing....what else could this be? It's driving me nuts...

Is it a vibration you can just hear, or can you feel it? Where does it sound like its coming from?
 

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
How 'bout those I/C pipes JR ??

As previously mentioned.. When you've got some boost pressure going, RPM related... they can & will move (stiffen, so to speak) some, and make contact with things.
 

JRJ04

Senior Member
Joined
Jun 18, 2007
Messages
1,737
Reaction score
4
Location
Houston, TX
I can feel it more than hear it. Seems to be coming more from the rear of the vehicle...like maybe back seat or behind?
 

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
I can feel it more than hear it. Seems to be coming more from the rear of the vehicle...like maybe back seat or behind?

Hmmmm.

Tranny cross member ? Exhaust pipe near right rear shock ? (look for shiney spots ?)
 

02Oilburner

SDD Power Hungry
Joined
Dec 20, 2007
Messages
596
Reaction score
10
Location
Raleigh, NC
;tu

When you get to it.. along with whats been mentioned.. you could also check your I/C pipes.. on the drivers side, wiggle it a bit... yul be able to find/feel where it might be touching something.

On the passenger side.. it can tend to hit/rub on the A/C dryer bracket.

Again.. the contact can happen when the engine torques over.

Might be time for New I/C boots... they tend to get soft & saggy.. with time & miles ?

Have a good Holiday.

Joe

I just got my 6.0 intercooler this evening!!!! It is new in the original box from Ford for $400 DELIVERED!!! I have all the Boots for the top of engine and the 6.0 to 7.3 IC boots from Dieselsite. I will be able to see if the vibration noise is from the IC boots tomorrow. It vibrates now sometimes at idle. I hope changing all the boots and the Intercooler fixes the vibration noise its driving me NUTS!:dizzy If not Ill at least have alot more cool air which is never a bad thing! Ill keep you guys posted!;tu
 
Last edited:

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
I just got my 6.0 intercooler this evening!!!! It is new in the original box from Ford for $400 DELIVERED!!! I have all the Boots for the top of engine and the 6.0 to 7.3 IC boots from Dieselsite. I will be able to see if the vibration noise is from the IC boots tomorrow. It vibrates now sometimes at idle. I hope changing all the boots and the Intercooler fixes the vibration noise its driving me NUTS!:dizzy If not Ill at least have alot more cool air which is never a bad thing! Ill keep you guys posted!;tu

:coffee ;) ;tu
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top