Oil Fill from Factory
- Thread starter ls1meyer
- Start date
charlescmoss3
SDD Junior Member
Your owners manual should tell you.
DaveBen
SDD Senior Member
Who reads the Manual???
Dave
Dave
WD40
Full Access Member
First off, Welcome to SSD.com, from Indiana.
Glad you found us and hope you come back often.
If it were my new truck with only 3000 miles on it
and it was low of oil, I would drive it by where I
bought it and let them check the oil and make a
record of the usage.
Hope you can post up some pictures of your new
truck soon.
Doug
Glad you found us and hope you come back often.
If it were my new truck with only 3000 miles on it
and it was low of oil, I would drive it by where I
bought it and let them check the oil and make a
record of the usage.
Hope you can post up some pictures of your new
truck soon.
Doug
Smoky
Full Access Member
X2 on what Doug said about carry it to the dealer. A new truck shouldn't be losing or possibly using oil.
JRJ04
Senior Member
I believe it comes with 10w-30
Especially that part, of what Doug said.
Get a Paper/Data trail started.. for any future issues.
It was only down 1/2 qt. I was getting ready to take off on a 1000 mile trip pulling a trailer and I just wanted to top off the oil in order for the engine to have plenty. What weight do most of you use? I was thinking of going to 15-40 at the first change.
DaveBen
SDD Senior Member
15 W 40 is used a lot and so is 5 W 40. I am running 5 W 40 in my 6.0. 10 W 30 is for gas motors.
Dave
Dave
