OEM Brake controller EOH mode

[Odyknuck]

I have a 2013 F250 Diesel with the integrated Brake Controller. I recently converted my 5th wheel trailer brakes over to Electric over Hydraulic with a Hydrastar pump. The OEM brake controller has a selection for the EOH trailer brakes however it does not seem to work any different than the standard Electric brake mode, please advise.
Thanks
Steve

 

[Odyknuck]

Hmm, nobody knows the difference between the two modes?

 

[DaveBen]

There is almost nobody here. You might try doing a google search for brake controllers.

 

[Odyknuck]

Goggle is where I started on this quest without much specific information found.

 

[DaveBen]

That is google for you... Try www.duckduckgo.com for a search engine that DOES NOT TRACK YOU - like google does. Type "brake controller". The modes do not seem to matter.

 

[Odyknuck]

That was my findings too. There must be a difference otherwise why have a separate mode.

 

[eZAK61]

I think it has to do with the Gain setting. For instance; a setting of say 8 in elec. mode might be the same as an 6.5 in eoc mode,
as far as electrical output goes. That was my experience. I had a fifth wheel with eoc now I have a 5'r with all elec.