HELP PLEASE!

[tommydawg]

hey guys im stuck here, my 97 7.3 all of a sudden just started losing power untill it just died all within about 2 miles , i did notice a check engine light but it didnt say on long, my buddy borrowed a scanner and I pulled 3 codes p0344, p1211, p01212, this is my work truck can anyone please help me before I lose my job and my mind, I changed the fuel filter, and have over 3000psi out of the hp oil pump could it maybe be a cam sensor? thanks

 

[95_stroker]

P0344 Camshaft Position Sensor Circuit Intermittent

I'd guess you lost the CPS then the 1211 and 1212 codes came in as a result of that.

P1211 Injector Control Pressure Sensor Above / Below Desired
P1212 Injector Control Pressure Not Detected During Crank

 

[tommydawg]

thanks 95 stroker, is that sensor located down by the blancer

 

[95_stroker]

Yes, if you are looking at the front of the engine it will be at approx 10 o'clock in relationship to the crank. You'll need a 10mm on a ratchet to get her out.

 

[MBRPCrazyford]

thanks 95 stroker, is that sensor located down by the blancer

yup, I believe it takes a 10mm socket and a flathead screwdriver to take it out. 10 min job.

 

[tommydawg]

allrite now, thanks again guys maybe I can get back to work tommorrow.