Fog Lights

HDFXRUSA

SDD Junior Member
Joined
Jan 2, 2008
Messages
3
Reaction score
0
Location
Milford Ct
Fellow Brothers from another Mother,
I was just under the front bumper getting ready to upgrade the foglights to 9005's when it looked to be a real pain in the -ss to get to the bulb.
Can anyone explain an easy way to get to the bulb?

Thanks,
HDFXRUSA (Keith)
 

trackspeeder

Stone Crusher
Joined
Apr 1, 2005
Messages
1,392
Reaction score
0
Location
North Branford CT
Fellow Brothers from another Mother,
I was just under the front bumper getting ready to upgrade the foglights to 9005's when it looked to be a real pain in the -ss to get to the bulb.
Can anyone explain an easy way to get to the bulb?

Thanks,
HDFXRUSA (Keith)

I don't think there is an easy way.:lmao:lmao
 
Joined
Feb 22, 2007
Messages
967
Reaction score
0
Location
georgetown texas
you have a liscense plate you pretty much have to break the mounts that the front plate holder has. Then if i remember right you have to have a small screwdriver and they'll fall right out. Now for putting the liscense plate back on heavy set of zipties kept mine on for years.
 

HDFXRUSA

SDD Junior Member
Joined
Jan 2, 2008
Messages
3
Reaction score
0
Location
Milford Ct
hmm ive never looked i was hoping to go to silverstar ultra 9005s soon too is it easiet to pop them out of the bumper?
Got this info from another site. Very easy to do took about 2minutes per side.

From http://www.analogstereo.com/pdf/om/...manual_2006.pdf

Replacing foglamp bulbs (if equipped)

1. Make sure the headlamp switch is in the OFF position.

2. Remove the bulb socket from the foglamp by turning counterclockwise.

3. Disconnect the electrical connector from the foglamp bulb.

Install the new bulb(s) in reverse order.
 

Members online

Forum statistics

Threads
30,540
Messages
266,126
Members
14,667
Latest member
TacoCat
Top