AIH Delete?

[CHPMustang]

Is this a 7.3L only mod ?!?!?

ya guys gotta member there are us red-headed step child 6-OHNO liter owners on here as well

To my knowledge John this is for the 7.3L's but doesn't entirely rule out the 6 oh's

 

[ForumBlue]

I got a plug and code eliminator for about $26.00. I didn't realize I didn't need the code eliminator at the time. But for $26 bucks it was cheap enough not to do a lot of research. No codes so I guess it's doing it's job.

In the pic. the code eliminator is just to your left of the plug. It goes up just over the trans. fluid dipstick.

 

[CHPMustang]

I got a plug and code eliminator for about $26.00. I didn't realize I didn't need the code eliminator at the time. But for $26 bucks it was cheap enough not to do a lot of research. No codes so I guess it's doing it's job.

In the pic. the code eliminator is just to your left of the plug. It goes up just over the trans. fluid dipstick.

You have the Public URL for that plug and code eliminator photo there Forum?

Bill

 

[ForumBlue]

You have the Public URL for that plug and code eliminator photo there Forum?

Bill

Bill, I got it at Black Cloud Diesel.
I just checked and it's not on the site anymore.

 

[bigdaddyTank]

You can make your own using a 470ohm 1/2 to 1 watt resistor. Add the resistor to a wire and ground it from the post the AIH wire was removed from on the relay, the resistor simulates the AIH.

 

[CHPMustang]

You can make your own using a 470ohm 1/2 to 1 watt resistor. Add the resistor to a wire and ground it from the post the AIH wire was removed from on the relay, the resistor simulates the AIH.

Sounds like I'll be building a few CE's Saturday,one for our Excursion and one for Budro's truck

Thanks for heads up on the resistor

Bill

 

[whatabudro]

Sounds like I'll be building a few CE's Saturday,one for our Excursion and one for Budro's truck

Thanks for heads up on the resistor

Bill

meanwhile........ Budro has been spotted in the Home Depot parking lot waiting for a Dodge Cummins to pull up so he can get an oil pan drain plug.......

 

[Dieselmeister]

Well.... I went to Vatozone to try and get the plug.... If you don't have a make and model forget it....

I headed over to Napa and they had to order it but I will have it tomarrow... They tried to cross-ref to the Orielly number from the WIKI article, but it didn't work ... at least they knew they could look into a book and find what I wanted and order it... Sucker cost $10...

Hopefully it comes early enough so its not too hot to work on it.

 

[ForumBlue]

Well.... I went to Vatozone to try and get the plug.... If you don't have a make and model forget it....

I headed over to Napa and they had to order it but I will have it tomarrow... They tried to cross-ref to the Orielly number from the WIKI article, but it didn't work ... at least they knew they could look into a book and find what I wanted and order it... Sucker cost $10...

Hopefully it comes early enough so its not too hot to work on it.

Good luck. Where your at it's too hot to sit down.

 

[whatabudro]

Well.... I went to Vatozone to try and get the plug.... If you don't have a make and model forget it....

I headed over to Napa and they had to order it but I will have it tomarrow... They tried to cross-ref to the Orielly number from the WIKI article, but it didn't work ... at least they knew they could look into a book and find what I wanted and order it... Sucker cost $10...

Hopefully it comes early enough so its not too hot to work on it.

I steer away from autozone at all cost, being a hotrodder and asking for a small block chevy part drives them nuts if they cant look it up on that computer. I found a dodge cummins and swapped my AIH for his oil drain plug, even hooked the wires up for him Now really that wouldn't be very nice would it, I bought the plug at oreily for $12.55 with tax, it was out on the shelf so I didn't have to mess with that whole computer thing. I'm gonna meet CHP tommorow and he'll tell me when I'm messing up.