6.0 Horsepower and torque

[janders]

Is this chart right for horsepower and torque gains with the edge juice?
Click Here If so, that looks really good

 

[powerboatr]

they left out the plot on the point your head gaskets pop
coolant boils out

 

[janders]

Yeah, that seems like too much power (if that is possible, TOO MUCH POWER)

 

[ranger boy]

Ehhh Roberts just jealous cause
A. I could run him over
B. He's too slow to run away


P.S. I usually keep mine on 3, it's safe, and it's PLENTY of power

 

[janders]

I am probably going to get the platinum. Is the third setting 80 hp gain?

 

[powerboatr]

Brent
yep
i know wht my7.3 would do, just nervous as a cat pooping razors about chipping the 6.0.
but i am about jump off the fence and get a tuner,
i really liked my predator four big black tire marks are so sweet

 

[janders]

what is your concern with putting a chip on the 6.0

 

[janders]

By the way, Brent, Robert, my name is James....I guess I should just put that in my signature

 

[powerboatr]

what is your concern with putting a chip on the 6.0

James,
A. 6yr 150k warranty
b. HEAD gaskets
c. wife killing me for toasting the truck
d. EGR issues, cooler and coolant boiling while pulling the rv 14k lbs.

last but not least.....
replacing rear tires more often

I am hoping for 06 the 6.0 is fixed and we have no more alarms of flash boiling coolant or head gaskets.
i give it a few more months then we getting a tuner....

 

[Kleetus]

An interesting point on curve 3... the VT365, which is what Intl. calls the 6.0, has roughly the same torque... it peaks out at 620 ft lbs, just under or around 2k rpm. I wouldn't be at all afraid to run level three. In fact, I may go and get one myself...