2011 f30 snow plow pkg

stang13

SDD Junior Member
Joined
Oct 8, 2010
Messages
8
Reaction score
0
Location
pgh pa
Hi I am waiting arrival for my first ford truck . I have the snow plow pkg option added to my order and had a question . I know that the pkg consisted of heavier front springs , does anyone on here have this option and if so does the truck sit level or does it still have the rake to it ? I wanted to try and run 33's and I am not sure if they will fit without a leveling kit

Thanks
Tom
 

Fine69

Senior Member
Joined
Mar 13, 2006
Messages
864
Reaction score
0
Location
Cranberry Twp,PA
I have it on my 09 and the front still sat 2.5-3" lower than the rear. I added a 2.5" leveling kit and it sits nice now. I'm running 325/65/18's, which are the equivalent of a 35x13.5" tire, with no rubbing at all.
 

stang13

SDD Junior Member
Joined
Oct 8, 2010
Messages
8
Reaction score
0
Location
pgh pa
Hi Bob

Thanks for the info are you running the factory rims ? If so what is the width . I am going to have the 20 " wheels . Do you think that 33X 12.50 X 20 will fit with out the leveling kit then ?

I see you live in cranberry I live down rt 19 in wexford
 
Last edited:

Reverend Jim

SDD Junior Member
Joined
Nov 9, 2009
Messages
19
Reaction score
0
Location
usa
Tom,
I have an '09 F250 with the 6.4L, it has the snow plow and FX4 packages. It sits level front to rear, and the stock tires are 275/65-20. These are a true 33" tall by 10.5" wide tire, (measured with a tape-measure). Hope this helps with your decision.
 

Fine69

Senior Member
Joined
Mar 13, 2006
Messages
864
Reaction score
0
Location
Cranberry Twp,PA
Tom,
I have an '09 F250 with the 6.4L, it has the snow plow and FX4 packages. It sits level front to rear, and the stock tires are 275/65-20. These are a true 33" tall by 10.5" wide tire, (measured with a tape-measure). Hope this helps with your decision.

F250's often sit level because they have a smaller rear block, so comparing to an F350, they usually will appear to sit level.
 

Fine69

Senior Member
Joined
Mar 13, 2006
Messages
864
Reaction score
0
Location
Cranberry Twp,PA
Hi Bob

Thanks for the info are you running the factory rims ? If so what is the width . I am going to have the 20 " wheels . Do you think that 33X 12.50 X 20 will fit with out the leveling kit then ?

I see you live in cranberry I live down rt 19 in wexford

I run the factory 20" wheels in winter with 325/60/20 Nitto Terra Grappler's, which also are 35" tall and approx. 13" wide. Factory 20's are 8" wide. In Summer I use the tires and wheels listed in my signature. 33's will DEFINITELY fit without a leveling kit, they may even look small.

I live just north of you in Cranberry, actually grew up in Franklin Park, even closer to where you are. Welcome to SDD!
 
Last edited:

dc.snowball

SDD Junior Member
Joined
Feb 25, 2011
Messages
11
Reaction score
0
Location
bear, delaware
stang13...dc.snowball here...i have an '11-350-20"rims-plow prep-& all the goodies. springs are same with or w/o prep.(w/6.7)...6000#fr.axle...skid plate ..alt +few other goodies... stock its about 2.5" front rake... with a fisher plow frame kit.. we pull heavy eq. we put an 1.5" level kitand it leaves@ 1' low in frone ...but with any wt. in the back it works out great. for load dist.
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
Hey dc, fill out your signature so we all will know what you drive. Go to the QUICK LINKS in the TOP BLUE LINE and click on EDIT SIGNATURE. This will better help us help you. Thanks.

Dave :)
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top