Search results

  1. teameyecatcher

    Train horn install ?s

    Yes, I dont know at what PSI it switches on and off, but I may end up adding a switch to that too. When I was working on it after connecting the constand power and ground, it kept switching on and off as i was fixing air leaks. Could get annoying if it constantly goes on and off when I'm not...
  2. teameyecatcher

    Train horn install ?s

    I like the idea of adding aux air capability. I'd like to do so for the same reasons (filling up truck and trailer tires). Although I dont know how well such a small tank will work doing it...it'll have to work overtime but I'm sure its ok...cheap to begin with. The horns came with two...
  3. teameyecatcher

    Train horn install ?s

    Thanks for the quick reply. I got the Omega Excalibur Triple train horn set with a 5 liter tank and compressor. It's not really a "real" train horn but it'll do the job I reckon. Still louder than it should be :D Here's the link...
  4. teameyecatcher

    Train horn install ?s

    For all of those out there with train horns--I just got mine today in the mail, and was wondering where to mount these big ole' things. I didnt realize just how huge they'd be... I was thinking about putting them under my toolbox but I really dont want to drill holes in the bed for something...
  5. teameyecatcher

    Help! CB antenna pass through

    Yeah thats what I ended up using (the air vent). Guess I need to get back there and put the loop in it. Thanks for all the replies-I got it all done up in no time flat thanks to the help. I'm trying to figure out what to use to mount the CB to the dash where that coat hanger thingie is. I...
  6. teameyecatcher

    Help! CB antenna pass through

    Do i need to remove that back panel behind the seats to get to it?
  7. teameyecatcher

    Help! CB antenna pass through

    I just bought a new CB for the truck and I need some help from all you out there with experience...I need to pass the Coax antenna through from the cab to the bed to connect to my toolbox-mounted antenna. Where can I go through?
  8. teameyecatcher

    Gettin my lift today

    PICS! The 295s worked out perfectly :thumbs
  9. teameyecatcher

    Gettin my lift today

    Now you see why I cant deal with it:D
  10. teameyecatcher

    Gettin my lift today

    The lift itself sells for around 1300-1500, and its the only thing (i mean the ONLY thing) available for 05+ 2wds. Plus, my truck is so low to begin with (Ill attach a pic), that a 33" (nitto rates the tire at 33.19"x12.13") tire is pretty much the biggest I can fit without rubbing. All in...
  11. teameyecatcher

    Gettin my lift today

    Since its a 2wd, lifts are more expensive for some reason...I got the 6" performance fabtech, the tires, and install for everything for an even 3 grand.
  12. teameyecatcher

    Gettin my lift today

    Just thought I'd tell everyone, because I'm so proud :thumbs Got a 6" Fabtech performance lift with some 295/70-17 Nitto Terra grapplers (small but should be OK). I also got my SCT tuner today. Hopefully everything will be done tomorrow, I'll get some pics to show off :sweet
  13. teameyecatcher

    6.4l TT PICTURE......

    Thats good to know about the tailgate--looks like a next purchase...cant wait to see how much thatll cost
  14. teameyecatcher

    How to make it smoke

    Since I'm new to the diesel world, I still haven't had the satisfaction of blowing black smoke out the tailpipe (although I really, really want to). Is there any way to do this without using a chip or programmer? I have a long time left on my warranty, and I dont want to void it by leaving a...
  15. teameyecatcher

    Rough photoshop edit of lift

    Well the Fabtech with the performance system or what not runs about 1300 just for parts. Who knows how much install will be...I usually do it all myself but this one requires cutting and all that type of business. Preferably, I'd like to spend more like 500 or 600 just to get some height to...
  16. teameyecatcher

    Rough photoshop edit of lift

    If you wouldnt mind, could you see if there are any others for a 2wd? My problem is that no one besides Fabtech seems to make them for the 05+ models. I'm looking into getting custom coil springs made for the front that would just level it out (with new shocks), but I'd like to see if theres...
  17. teameyecatcher

    Rough photoshop edit of lift

    Didn't have mcuh choice with the 2wd. My old car had been broken into twice this summer, got rid of it and was driving a borrowed car in the meantime. This one came available and was the right price, plus it was from a close relative so I knew the history. I'd rather spend the extra 100 or...
  18. teameyecatcher

    Park Assist problems

    Well I had been wondering why my Park Assist didnt seem to want to come on (esp after almost backing into a couple of posts), then I read that if the disabled light was always on then it was broken (duh). Has anyone else had problems with theirs? I'm hoping its not something ridiculously...
  19. teameyecatcher

    Rough photoshop edit of lift

    Not for off-roading. I've had slightly lifted 4x4s in the past, and I just can't seem to get over how low this model is. Its just for personal satisfaction, because I think a truck should be taller.:dunno I may not even do it-just a thought
  20. teameyecatcher

    Rough photoshop edit of lift

    Well I'm wondering what size tire I could actually put under there... Fabtech says that the 6" lift on a 2wd would fit 315/70-17 (about 34.5") with minor trimming. I know a 6" on a 4wd would easily fit those 35's, but Ford specs show that mine is about 2-3.5 inches shorter than a 4x4...who...
  21. teameyecatcher

    Rough photoshop edit of lift

    I did a quick, rough photoshop of my 2wd with a 6" lift (also some painted handles and tint :D ). Do you think that this would be its approximate size with the lift on it? I'm just trying to get a good idea of what she'd look like, and if I'd even want to go that tall.
  22. teameyecatcher

    New guy

    Finally got some pictures. You can see the painted mirrors and all from here. I also went stealth with two stickers-a black billfish foundation logo on the window and a silver AFTCO decal on the bumper...gotta keep it low-pro. Anyways, I took these today before I mounted my ice chest behind...
  23. teameyecatcher

    New guy

    Thanks-I figured the Ford was the way to go. I've had enough trouble with GM, and this diesel should last for a long time to come.
  24. teameyecatcher

    New guy

    Bama- Thanks for those chrome mirror part numbers a while back. I ordered some from fordpartsonline.com and they ended up sending me another pair of black ones -mad . Anyways, I ended up just painting those and they look good anyways. Thanks to both of y'all for the welcome. Question for...
  25. teameyecatcher

    New guy

    Hey everyone-Just wanted to introduce myself. I'm new to the Ford and Diesel world, coming from having a 99 Yukon then an 02 Tahoe Z71. I used to run a site like this one for Z71 Tahoes, but it fell apart once I got rid of my car. Anyways, I just purchased a 2006 F250 Lariat, although it is...

Members online

Total: 167 (members: 3, guests: 164)

Forum statistics

Threads
30,540
Messages
266,126
Members
14,667
Latest member
TacoCat

Latest posts

Top