Search results

  1. roosterdiesel

    Hoss 350

    Didn't he just move his MIL up there with him?:eek: :doh:
  2. roosterdiesel

    Texas Region Area Members Check In Here!

    :tex Up here in the middle of the panhandle in Amarillo.:tex
  3. roosterdiesel

    What Will RoyBoy Do?????

    Guess how I voted!:tounge
  4. roosterdiesel

    Need help now!!

    When I had to get my watery fuel out I couldn't get a siphon pump hose down my fill hose. Really ticked me off too! Personally I wouldn't want any gas in my fuel with ~$300 injectors these engines have. As far as the dealer....one left arm and one right leg prolly!:roflmao
  5. roosterdiesel

    Need help now!!

    Buy some 5 gallon gas cans, remove the outlet from the fuel pump, attach a hose, pump into cans. I don't think the blend will hurt the pump. Once the tank is empty enough drop the tank and get the rest out however you can. Use compressed air on the lines, just make sure the hoses are...
  6. roosterdiesel

    Dahl 100 Fuel Filter

    My restriction guage reads zero with a new filter for a few thousand miles. So IMO the OEM steel line is fine with stock injectors. It appears that screens in the mixing chamber are your problem. If I were you I'd eliminate the chamber and do the Hutch mod. You could drain the fuel...
  7. roosterdiesel

    first diesel!!!!!!!!!!!

    Gauges are a must with a chip or programmer! You will be happier with a chip from DP Tuner or Twildman. You can get programs from either one of those two from Beansdieselperformance.com. You'll have to call for the Twildman info. If you don't have to have switch on the fly you can get a...
  8. roosterdiesel

    Be careful of what you say!

    :eek: :eek: :eek: :cussing: :cussing: That's absolutely crazy! $2500 bond but they owe ~$250 since 2001.:confused: I guess I took the wrong math classes in school.
  9. roosterdiesel

    Dahl 100 Fuel Filter

    Did Bob's install kit come with hose to go from tank pickup to the Dahl? Only other thing I can think of is that the hose is kinked or pinched somewhere.
  10. roosterdiesel

    Dahl 100 Fuel Filter

    What's the reading with the engine not running just to rule out a bad gauge? Should be zero.
  11. roosterdiesel

    Dahl 100 Fuel Filter

    You removed the element from the Dahl housing or removed the whole Dahl unit from the system?:confused: Either way, 8in Hg is too much for the pump. Being on #2 with that much restriction I believe the screens in your mixing chamber in the tank are plugged.
  12. roosterdiesel

    Dominator 66 Turbocharger

    From my conversation with Ryan over the phone. It's great for stage 1's and 2's. Keeps the EBPV because it uses stock exhaust housing on the OBS and a 1.0A/R wastegated housing on the early 99's. Late 99 version is also available if you ask him about it. As for the flow, it's reported...
  13. roosterdiesel

    programers

    The DMAX is a totally different application. They can claim whatever they want. Marketing $$ does wonders for Banks. There's other stuff for the DMAX that will blow the 6gun away too. For a Ford the SCT from Jody or Tadd will blow it away. DP Tuner standard files...$459...
  14. roosterdiesel

    How long would an auto last???

    Ummmm....not knocking BTS.....but I think Roy likes to row gears and put know where his RPMs are going to be and when. He doesn't like girly trannies.:tounge Like already stated, the floor will need fabricating. You'll also need the manual tranny PCM and wiring harness. It's been done...
  15. roosterdiesel

    Somebody made a mistake...

    I agree. They have to take several samples in cylinders for testing at later dates. The concrete is fully cured IIRC in 28 days. If they called for 5000psi concrete and it doesn't pass later the structure has to come down. Also air ing the crete has something to do with it passing. Bad...
  16. roosterdiesel

    programers

    The 6-gun is not a programmer. It does NOTHING to the PCM tables, it alters the signals going to the PCM from sensors tricking it. It is basically an expensive ICP mod. A real programmer will interface with the computer via the OBII connector and flash a whole new program to the PCM after...
  17. roosterdiesel

    Dahl 100 Fuel Filter

    -11 what? " hg or kPa? I don't like to have more than 8-10 inches of mercury restriction. Looks like the vegetable oil is too thick for the 2 micron filter.
  18. roosterdiesel

    New Plant in Clovis, NM

    Well hopefully we can get something higher than B20 around here when that's completed.:D
  19. roosterdiesel

    Turbo fin analysis

    Dennis at ITP doesn't sell the compressor wheels anymore, at least I can't find it on his site. The WW is for the 99.5 SDs because the early models had that wheel from the factory. Wheels are the same except every other vane on the WW is shorter to change the map of the turbo.
  20. roosterdiesel

    Turbo fin analysis

    The Tymar is better than the stock OBS POS air box. Pretty much the same filter media just more of it with no POS air box to NOT SEAL. If you question the filtration, put a dab of grease inside the tubing, drive for a week and see if it has any dirt stuck to it. Was the hose cracked all the...
  21. roosterdiesel

    Big Oil Leak

    The factory hoses on the SDs have quick disconnects and I paid $120 for one hose at the dealer, it was made by aeroquip. The OBS's I believe don't have the QD fittings and have JIC connections on the hoses. Any competent hose shop should be able to make a new hose. AA Sales on Polk St. here...
  22. roosterdiesel

    Turbo fin analysis

    That blade on the left is hard to make out....email me a full size version of it if you have a larger one so I can zoom in on it. It does look weird though. They must've put a reman unit that had a later model wheel in it. Weird!
  23. roosterdiesel

    Turbo fin analysis

    That does look like a late 99-03 compressor wheel.:confused: The round marks are from when the wheel was balanced. The nicks however are not good but will not cause big probs...just shows that some dirt has hit the vanes.:(
  24. roosterdiesel

    BioDiesel and O-Rings

    Everything on the SDs is BD compatible unless you've done the pre-pump mod and used a hose that's not Viton or teflon.
  25. roosterdiesel

    What do you guys think about Hypertec Hyperpac?

    Tony Wildman :cool: The original poster is happy for now with his HyperPac and doesn't have the $$ to get a PCM even if he could return it. He will prolly eventually outgrow the HyperPac. Only way you get a real custom tune from Jody is live tuning like you did. Everything else is "his"...

Members online

No members online now.
Total: 471 (members: 1, guests: 470)

Forum statistics

Threads
30,555
Messages
266,178
Members
14,679
Latest member
Ricksofla

Latest posts

Top