Search results

  1. f100cleveland

    Trailer brake controler

    Ok I hooked up the trailer and when I push the reset in dash the TBC FAULT goes out and brakes and lights seem to work normal. If I use the manual control on brake controler the brakes work but it sets off the chime and TBC FAULT shows up again on display and doesn't go off unless you push...
  2. f100cleveland

    Trailer brake controler

    I am getting a TBC FAULT on my dash display. Just happened with no trailer hooked up. Heard a beep or ding and there it was. Any ideas on what to look for or how to test. Hooked up trailer plug to truck and all the lights work but haven't pulled it to try brakes.
  3. f100cleveland

    new trailer

    Its a Hurricane Cargo typhoon series. Upgraded to torsion axles and 16inch wheels plus the racer II package. Made in Fitzgerald Ga. Quality seems to be ok but its not a top of the line trailer. We don't travel cross contry racing just mainly local so it will be just fine. The price was the main...
  4. f100cleveland

    new trailer

    Quick road trip down to So. Ga to pick up the trailer we had custum built. 36ft v-nose gooseneck with a race II package and a few other upgrades. Left Mon after supper and were home Thurs after noon around 3:00. 2700 miles.
  5. f100cleveland

    6.7 failure

    Duh Didn't even think of it that way.
  6. f100cleveland

    6.7 failure

    How hard was the swap? You have a complete donor truck? Need more info sounds awsome;tu
  7. f100cleveland

    Weak starting

    I know you said you checked connections but have you been under your truck to check starter connection?
  8. f100cleveland

    boost after egr delete

    I'll find out how it does once I get a trailer and load on it.
  9. f100cleveland

    boost after egr delete

    I have the same strategy on PCM that it went in with. so don't think its that.
  10. f100cleveland

    boost after egr delete

    Got my truck back today and wot I can only get 22-23lbs boost. It would go to 27-28lbs before. I did a search and some people say this is normal. What have the people that have done the egr delete on here seen for boost? They did a turbo rebuild too with a new ring.
  11. f100cleveland

    What do you do?

    Mechanic, heavy equipment operator and hauler, and now a county highway worker truck driver. Guess that covers the last 40years
  12. f100cleveland

    "Small" Diesel engines

    There should be alot of Isuzu or Kabota small diesels around. They are used in alot of industrial or commercial applications. We have a couple at work and they run forever on a gal of fuel.
  13. f100cleveland

    6.4 banjo bolt mod

    I have a bb under the stock spring but have the part no. for blue spring and 6.4 banjo bolts. Have to run the parts from sinister diesel to the dealer so will get parts for fuel system then. Dealer told me ficm is shot too. Lucky Me
  14. f100cleveland

    6.4 banjo bolt mod

    There is a check valve in the 6.0 banjo bolt and not in the 6.4 bolt. The reason for replacing it is for better flow but the check valve must of been in there for a purpose. I know some guys on here have done this and just would like to know if it helps or just one of those useless mods or a...
  15. f100cleveland

    6.4 banjo bolt mod

    My truck is in the shop getting arp's,, egr delete and oil cooler. Is it worth it to do the banjo bolt mod or a bad idea because of no check valve in the 6.4 bolts?
  16. f100cleveland

    Quick coolant flush question?

    I see your truck is a Lightning hauler. Whats it run at the track?
  17. f100cleveland

    It is time

    I've read both ways and I don't plan on raceing or pulling a sled with it so just the arp's in it are peace of mind. The Kit I got has lifetime warranty but thats parts and I would have to eat labor.
  18. f100cleveland

    It is time

    Yep its finally time to get egr delete, studs, black onyx head gaskets, new improved oil cooler, and flush job with cat elc. My turbo started acting up again with low or no boost so since it had to go in to get fixed might as well do it right. Hope its done before the road trip the first week in...
  19. f100cleveland

    Taking to track tomorrow

    668tq at 6700 and 913hp at 7700. Plan on leaving line at 7200 and shifting at 8500. All new from front to rear 4link and haven't got it back together yet so will be a learning experience. Hope to be on track in a couple weeks.
  20. f100cleveland

    Taking to track tomorrow

    Cylinder head innovation and they flow well into the 400's. Q16 will give most engines around 15 extra hp but the tune is harder to keep in adjstment. Price makes it out of our league. We are running ICE ign not CHI. My bad
  21. f100cleveland

    Taking to track tomorrow

    351w with CHI Cleveland heads, intake, and ign. Stroked to 436 single carbed c14 gas only. Has been in the 9's at 135 with the old 427sb but its like a brick compared to a car for areodynamics. Keep your truck hooked to the trailer cuz your cars have got to be alot more fun on the track.
  22. f100cleveland

    Taking to track tomorrow

    Don't really know what a 8000 lb truck should run down the 1/4 but that seems about right. Now I don't have to do mine. Ha ha Just dynoed a new motor for the white truck that made 913hp so it should be a little quicker down the strip this year. What are your cars that you race?
  23. f100cleveland

    Diesel power mags diesel challenge

    A 08 6.4 won the 3 day event with the best overall score.:clap: Looked like a real torture test for street trucks.
  24. f100cleveland

    Ordering new trailer

    Upgrade to 2-7000lb axles from the standard 3500lb.
  25. f100cleveland

    Ordering new trailer

    I need a little input for a few options on an enclosed gooseneek trailer I plan on having custum built. Need opinions on screwless exterior vers the screwed on type, 16" tires vers 15", torsion axles vers spring, and vinyl interior vers plywood. Its for hauling the lightning drag truck and a atv...

Members online

Total: 436 (members: 2, guests: 434)

Forum statistics

Threads
30,548
Messages
266,143
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top