Search results

  1. J

    Question Starting

    check the batt cables too
  2. J

    waterpump. giant nut

    or put the impeller in a vise to hold it if your changing the pump its junk anyway just squeeze it till it holds
  3. J

    Question Anyone used Hydraulic hose for HPOP lines and FPR Fuel Return

    becareful when you run biodiesel with rubber hoses it will cause them to get soft and swell they need to be viton or some other synthetic.
  4. J

    Can i tell if i have a dual mass flywheel?

    YOU DON'T HAVE A DUAL MASS those were only on the older trucks!
  5. J

    6 speed clutch questions

    replace the oring on that plug.
  6. J

    wanna run an excavator?

    if you look at the post its pretty much fool proof just takes some ba!!s to get in the seat!!
  7. J

    Can i tell if i have a dual mass flywheel?

    no on the dual mass if you are replacing it I highly recommend the LUK has a lighter let off with a higher clamp load I run 350-400 hp and no problems in 130,*** miles I also pull 37' 5er with in 45 hp setting. I also doubt its the orig. clutch if it towed anything it was probably replaced in...
  8. J

    Noob looking to buy myself a superduty

    welcome I'll be in your neck of the woods in aug.
  9. J

    Turbo Surge???

    yes that is where surge happens kind of a flutter sound now you need a wicked wheel.they are one of the cheaper mods.
  10. J

    New Owner! New to Diesel World w/7.3L Ford EX

    welcome!!!!! with afe intake and 4 " turbo back exhaust picked up about 1.5 mpgs bully dog 6 pos chip picked up 3.5 running 75 hp with my lead foot
  11. J

    Jack Stands

    they will probably work but you won't catch me under them.
  12. J

    Going to a 5th wheel from a cabover

    just becareful with the lift may have to flip trailer axles most all 5Rs are pin style unless you go with a stock or horse trailer which tend to be gooseneck but 5Rs can be fitted with a goose neck adapter. don't be afraid to ask to tow it, all tow differently.
  13. J

    R&R water pump

    I'd do the tstat too put in the 203* stat you wont be sorry
  14. J

    Antifreeze clean up

    dawn!
  15. J

    Brakes Question

    or could be, pad is completey gone and the caliper piston is on the rotor. i'd check it pretty quick.
  16. J

    No more truck for me!!!!

    considering its an OBS truck im sure they will total it with cab damage I'd pull every thing off it you can.
  17. J

    Anyone Miss Their Diesel?

    they will have to pry my fingers off that steering wheel as for breaking things I just call em spare parts if it breaks off did you really need it anyway?lol
  18. J

    Question what do you think about this OBD2 scanner

    After reading the owners manual it should have the enhanced software so you are good to go. you need ford enhanced soft ware to read the codes on the superdutys all you may get with it are speed air temp one other that i forget right now. it may not read the codes I could be wrong but I have a...
  19. J

    Tires causing steering wander?

    use a good quality gauge and stop at 65 psi
  20. J

    Soften the ride????

    add a 1000# to the bed that will help also.
  21. J

    Tires causing steering wander?

    2 things here! as stated above new tires have deeper tread which will cause more sidewall flex plus you went to a load range d tire more flexable as well. As long as you are not overloading the d range tires, you'll be fine as soon as you get used to them, also for longest tire life air them to...
  22. J

    Pilot holes??

    don't forget the muffler bearing grease!
  23. J

    Question rough running 7.3

    this may sound stupid but check your oil if its low it will do that also because oil is thicker when its cold and won't pump the injectors like it should
  24. J

    My PowerStroke Is Gone

    can you share a ballpark range what kind of trade they gave you was it near nada or kbb a simple yes or no would be ok I don't want to get too nosey thanks I'm looking for a 4wd dually 99 03 w/7.3
  25. J

    Talk about the 7.3L CPS Here!

    10 mm wrench to change it

Members online

Total: 566 (members: 1, guests: 565)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top