Search results

  1. toobsluver

    Possible fuel pressure issues, No acceleration.

    Got back from VA Beach last night. Had some problems on the way home. The worst was every time I hit a traffic light I had no pick up and you could tell that the engine was starving for fuel because it was shaking like crazy. When I stopped to get some fuel cause I only had a quarter tank left I...
  2. toobsluver

    Possible fuel pressure issues, No acceleration.

    Hey everyone, I haven't posted on here in a while. The last time I posted was when I had fuel delivery problems. I replaced the fuel pump on the rail and the fuel pump in the tank. I know it sounds crazy but look at my ordeal here...
  3. toobsluver

    New gauges installed how are my readings?

    Ok so I finally got my triple A-pilar gauge pod installed. I installed a trans temp gauge, a boost gauge, and an EGT gauge. Here are my readings. At cruising speed, 50 MPH, 85 degrees ambient temp: EGT is 600 Boost is 0 Trans is about 130. At WOT, 85 degrees ambient temp: EGT is 1000...
  4. toobsluver

    Coolant by pass for A/C...

    www.Dieselsite.com took care of it and even told me they were reading my post when I called! LOL :sweet
  5. toobsluver

    Coolant by pass for A/C...

    So I have a question, I just recently bought this: http://www.dieselsite.com/maxacassistaccontrolvalvefor1994-200373l.aspx When I opened my hood I found I have this: http://cdn3.autopartsnetwork.com/images/catalog/wp/full/W01331702034MTR.JPG Is this the same damn thing that I...
  6. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    Just an update and funny going through all threads that I have started over the years about this on going issue up until recently when my truck was really dying! It started here in 2009: http://www.superdutydiesel.com/forums/99-7-3l-powerstroke-engine-drivetrain/23813-rough-idle-no-power.html...
  7. toobsluver

    Rough Idle no power

    Just an update for anyone that is interested... I had this same issue get worse over the past 6 months and I ended up changing the intank sending unit... however, the intank sending unit wasn't what you would think it would have been. Check this out, it will boggle your mind. UGH!!! Hutch mod...
  8. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    The vent tube is already short. I felt inside the tank and it is only a half inch long or so. The fill neck goes in about 12 inches.
  9. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    This has become a PITA, I wonder if I can change it over to the standard fuel tank sending unit in the Hutch mod. According to O'Reilly's my sending unit has a pump in it. I'm so confused as what to do now.
  10. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    Ugh well it looks like I found the problem and this was what I was worried about. Apparently my Excursion is a "California Vehicle" I had this same issue with a glow plug relay issue I had some time ago and wondered why my relay was different than most peoples truck. Well I live in NJ not in...
  11. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    Here ya go... fuelpickup.jpg picture by toobsluver - Photobucket
  12. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    So I am in the middle of doing the hutch mod. My tank is dropped and opened, however my pickup doesnt look like the one in the picture on Guzzle's site. Everyone on here with an X is saying that there is no difference between a 250, 350, or an X tank. Mine doesnt match up and feels like it is...
  13. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    What's a buzz test? I plan on dropping the tank on sunday. I am not really driving the truck until then. Trying to get all my stuff together for the mods like the FRx, hutch mod, and the harpoon mod. Anyone have any opinion on this? Diesel Innovations Complete SS Pre-Pump fuel line kit
  14. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    That's exactly what's going on. :clap: Thank you! The tank is about 1/4 full I'll drop it and take a look.
  15. toobsluver

    Death shake in OD and 3rd gear, Possible fuel issue

    Hey guys, I've been having problems with my excursion since this winter but it has gotten severly worse. I drive my truck only on the weekends. I have a company truck I drive during the week. Back in the winter I was towing my friends 69 fast back out to PA to get restored and I was getting a...
  16. toobsluver

    Glow Plug recommendations and issues...

    Ok so this is where I am at now.... So I installed a new GPCM last night. Got power to all my glow plugs, cleared the codes and now I am still getting a P0677,76,75 and 72. But they all are working. So I dunno whats going on now. Everything ohm's at 1.0-.9 from the harness that plugs...
  17. toobsluver

    Glow Plug recommendations and issues...

    Yeah, it will be my second GPCM. The only difference besides still getting the codes, this time I am going to test the wiring and see if I'm getting power to the driver side of the motor with this new GPCM. I didn't do that with the other one. I just plugged it in, cleared the codes and the...
  18. toobsluver

    Glow Plug recommendations and issues...

    Yes it is disconnected when testing. Waiting for the new GPCM to get here.
  19. toobsluver

    Glow Plug recommendations and issues...

    Well this is where I am at now. If anyone is interested, at this point it is more for documentation on this site. I ohm'd ALL the glow plugs at the connectors under the valve cover or the in gasket connector. They all ohm'd .9 off the passenger side battery and ohm'd at 2.7 to 2.9 on the driver...
  20. toobsluver

    Glow Plug recommendations and issues...

    Found this, this might help...
  21. toobsluver

    Glow Plug recommendations and issues...

    I also tried replacing the glow plug control module. It's an expensive part. Well over $100, so I bought one from rockauto.com, installed it, cleared the codes, and tried starting my truck a few times, just for the codes to reappear. So I swore it was my glow plugs.
  22. toobsluver

    Glow Plug recommendations and issues...

    Yeah Dave, it's the Glow Plug Control Module. I don't have a relay. From what I am reading, my truck has a "California" glow plug system. The GPCM is my relay if you will. Here's a link with a good diagram...

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top