What is "zoodad" modification

[Hunter01]

This may be a stupid question, but what is the "zoodad" modification? What does it do when you modify?

 

[dennisj2003]

The link below will show you how to make the zoodad. and thank bamasixgun for this.

http://www.superdutydiesel.com/forums/vbpicgallery.php?do=view&g=599

 

[CHPMustang]

Before you bling up the inlet first you have to cut the opening which is where my How-to comes into play

 

[BamaSixGun]

Hunter, depending on what year truck you have, how you "route" the air after cutting the holes (per CHP's write-up) may vary.

Look HERE to see how others have finished off their Zoodad mod.

 

[WD40]

Welcome Hunter to SSD.com.
(This may be a stupid question)
Not at all, we are all here to learn
from each other so ask away.
Now I have a question for you?
How did you come by two nice looking racks
like you have in the back of your truck.
Come back often.

 

[Hunter01]

The racks are from the oregon coast. I have a 2001 F350, 7.3 crew cab, 4x4. Thanks for the info, I will check it out.

 

[kenholl]

This may be a stupid question, but what is the "zoodad" modification? What does it do when you modify?

If you are tight on time like I am, and can afford $60, I have the Predator Airfury. Bama's ZooDad is perfect, and inexpensive.

 

[HowieE]

Dennisj2003

I do like you work.

I have not gotten into mine yet but just lifting the splash cover at the top and looking down I was considering cutting the hole a bit lower to minimize the amount of water that could be aspirated into the filter. Any reason not to do this?

I have placed screen behind the complete grill to protect the AC condenser from stones and reduce the number of bugs that can become impaled in the coil.

What is the object sticking up in front of your hole in picture #6?

 

[MBRPCrazyford]

What is the object sticking up in front of your hole in picture #6?

I believe that is the MAF or MAP sensor. Not sure which of the two