IDSTROKER
Blackfoot ID
Ok i went and got new energy suspention bushing for my truck sway bar and end links i have 4 washer with them but the instruction don't show using them do i need to or leave them out any help would be great Thanks
sway bar bushings
- Thread starter IDSTROKER
- Start date
atk
Moderator
if you can wait till mourning, i`ll look at mine. i used the same kit, but can`t remember where i used the washer`s....
atk
Moderator
looked at this mouring and i used the washer`s on the inside of each end link bushing. on the other side, you have the sway bar and frame holding the bushing still....hope this makes sense
IDSTROKER
Blackfoot ID
yes Thank you very much have a good day
no-red 6 0
Senioritis
ask and you shall receive...
IDSTROKER
Blackfoot ID
Thanks for all the reply's and the help from everybody the part numbers that i have are for a 32mm 1 1/4 sway bar and double eye link's 4.5186G are Black bushing's and 4.5186R are for Red bushing's i bought them autozone. I also bought the track Bar bushing kit but waiting to tackel that job later that kit # 4.7126G Black and 4.7126 R for Red bushing's