Hi everyone 
I am very new to diesel world and Ford trucks. I purchased a 2004 F350 Super Duty Lariat crew cab long box. It presently has power adj, signals and heated manual extend/fold tow mirrors. Also has heated seats. I have purchased two new 2008 - 2012 Power tow mirrors that have power extend and power fold, as well as the signal and heat functions. I also bought the 2008 power mirror fold switch (P/N: 7L1Z-17B676-AA), the wiring plug (P/N:3U2Z-14S411-DLA (or also known as WPT-219 ?), the a power fold module (P/N:8C3Z-14N089-A), a DPDT momentary switch (for power extend function), an add a circuit fuse tap, a 5 pin relay socket, and a 2006 Super Duty window switch bezel to replace the bezel now in my 2004.
I was trying to convert the new 2008-2012 power tow mirrors that power extend and power fold onto my 2004 F350. Now at a stand still. Just cannot figure out how to wire them in. The connectors are different and I actually located on another forum, directions on how to convert 2008 mirrors to a 2005 F250, but it did not help at all, except to direct me on what other parts I needed purchase to complete this conversion . All the wires are different colors than the original wires and the 8 wires attached to the wiring plug (P/N:3U2Z-14S411-DLA) (or also known as WPT-219 ?) that goes to the 2008 power mirror fold switch (P/N: 7L1Z-17B676-AA) - are all GREEN? while the 7 wires attached to the original inside drivers door power mirror connector (where I thought I'd be tapping into) are all different colors.
I am not a mechanic. I am not a tech either - my bad I thought I could do this but I think I am in over my head. I contacted numerous audio shops and body repair shops in my area and none will touch this.
Bottom line - if anyone can send me a link with instruction, explicit as possible - it would be greatly appreciated. I may end up keeping the manual mirrors if I cannot figure this out, and then just sell the new mirrors and parts I just purchased. I am ok either way but I'd prefer the conversion if possible.
If anyone is near my area Utica, NY to Syracuse NY or Albany, NY and knows how to complete this conversion, please let me know. I can make the trip to get this done.
thank you in advance
rick
I am very new to diesel world and Ford trucks. I purchased a 2004 F350 Super Duty Lariat crew cab long box. It presently has power adj, signals and heated manual extend/fold tow mirrors. Also has heated seats. I have purchased two new 2008 - 2012 Power tow mirrors that have power extend and power fold, as well as the signal and heat functions. I also bought the 2008 power mirror fold switch (P/N: 7L1Z-17B676-AA), the wiring plug (P/N:3U2Z-14S411-DLA (or also known as WPT-219 ?), the a power fold module (P/N:8C3Z-14N089-A), a DPDT momentary switch (for power extend function), an add a circuit fuse tap, a 5 pin relay socket, and a 2006 Super Duty window switch bezel to replace the bezel now in my 2004.
I was trying to convert the new 2008-2012 power tow mirrors that power extend and power fold onto my 2004 F350. Now at a stand still. Just cannot figure out how to wire them in. The connectors are different and I actually located on another forum, directions on how to convert 2008 mirrors to a 2005 F250, but it did not help at all, except to direct me on what other parts I needed purchase to complete this conversion . All the wires are different colors than the original wires and the 8 wires attached to the wiring plug (P/N:3U2Z-14S411-DLA) (or also known as WPT-219 ?) that goes to the 2008 power mirror fold switch (P/N: 7L1Z-17B676-AA) - are all GREEN? while the 7 wires attached to the original inside drivers door power mirror connector (where I thought I'd be tapping into) are all different colors.
I am not a mechanic. I am not a tech either - my bad
I thought I could do this but I think I am in over my head. I contacted numerous audio shops and body repair shops in my area and none will touch this.Bottom line - if anyone can send me a link with instruction, explicit as possible - it would be greatly appreciated. I may end up keeping the manual mirrors if I cannot figure this out, and then just sell the new mirrors and parts I just purchased. I am ok either way but I'd prefer the conversion if possible.
If anyone is near my area Utica, NY to Syracuse NY or Albany, NY and knows how to complete this conversion, please let me know. I can make the trip to get this done.
thank you in advance
rick
Last edited:
