Please help

[Thecat]

I have been noticeing the last week that my 6.0l had been stumbling at idle. doesn't matter in gear or park. Idle is not level seems to be jumping up and down 200rpms. When coming up to a stop I can feel the engine stumble also. Works awesome lot of power, egt are fine. turbo boost seems fine also. Then today I come to the stop light truck stumbles and idles down to like 500rpm. Light changes I try to leave nothing on the go pedel. I shut the truck off started it back up and away I go. 2004 6.0L edge juice tuner on #2 always. Automatic trans. 60000miles. Truck starts fine. Cruising at hwy speeds i can feel a slight serge also. Can someone please help.

 

[jharvey]

I'd take the Edge tuner out of the equation just to rule it out for starters.

I'm sure some others will be along more suggestions later.

 

[DaveBen]

The EBP sensor has been know to make the engine stumble or miss when going up hill at part throttle. Mine has done this and the EBP sensor was replaced and it stopped. This sounds like the same deal.

Dave

 

[Thecat]

Truck did the same thing again today pull up to stop light try to pull away and nothing on the go pedel at all shut off and restart everything is ok. No engine light at all any ideas????

 

[bushpilot]

dont count on getting a CEL (check engine light) or MIL (malfunction indicator light)...

and you likely wont find any set codes w/ just any run of the mill scan
tool...youll need one that can get to and READ the manufacture specific
"CAN" data

autoenginuity is ONE such tool.