Oil leak at the bell housing

Frederex

SDD Junior Member
Joined
Jan 17, 2012
Messages
17
Reaction score
0
Location
Knoxville, Tennessee
:rant....I have picked up an oil leak at the bottom of the bell housing coming out at the inspection cover...I took a peak at it and there is not oil on the flywheel...sometimes it leaks a little and one morning I warmed it up and had a spot as big as a basketball...then it went back to a dribble...just wondering if anyone else is having this prob, and how they fixed it
 

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
:rant....I have picked up an oil leak at the bottom of the bell housing coming out at the inspection cover...I took a peak at it and there is not oil on the flywheel...sometimes it leaks a little and one morning I warmed it up and had a spot as big as a basketball...then it went back to a dribble...just wondering if anyone else is having this prob, and how they fixed it

Check for oil (and fuel) in the Valley, and around the HPOP fittings.. Most often.. Oil & Fuel leaks.. off of the Bell Housing, origonate elsewhere.. migrate down.. and drip from the Bell housing.. Making you think.. it's worse that it is. (the rear main seal).

Joe
 

Tbar

SDD STAFF/Moderator
Joined
Apr 6, 2005
Messages
2,673
Reaction score
10
Location
Texas
Check for oil (and fuel) in the Valley, and around the HPOP fittings.. Most often.. Oil & Fuel leaks.. off of the Bell Housing, origonate elsewhere.. migrate down.. and drip from the Bell housing.. Making you think.. it's worse that it is. (the rear main seal).

Joe

X 2


Tbar
 

iracemine

black and tan
Joined
Dec 10, 2006
Messages
958
Reaction score
0
Location
Cheese Curtain
X3. Mine was from oil coming from the "x" pipe boost tubes from the ccv oil vapors above the vally. And then it dripped down where you see it now.

Now it drips out the bottom of my bypass tube. :innocent
 

bbressler

Full Access Member
Joined
Nov 4, 2006
Messages
394
Reaction score
0
Location
Happy, TX
I had that one time and the top of the inspection cover had rubbed a hole in the oil pan...
could check that, too..
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top