No start 2005 6.0L Excursion

mfburns

SDD Junior Member
Joined
Dec 9, 2008
Messages
1
Reaction score
0
Location
Lansdale, PA
My son-in-law's truck will not start. We have heated it, charged the batteries, replaced the fuel filters, and still no start. Even when it warmed up into the 30's. It turns over and almost seems like it wants to start but no go. ANy ideas?
 

hollisda

SDD Junior Member
Joined
May 27, 2008
Messages
7
Reaction score
0
Location
Wichita, KS
The conditions that could cause a no-start on a 6.0L are long and diverse. It is not uncommon for it to be high-pressure oil related. The one that got me, and I’ve heard is not uncommon is a blown internal o-ring in top of an injector, where the high pressure oil rail inserts into the injector. Mine blew out under hard acceleration, pulling a 5th-wheel onto the interstate. But I have heard of them just failing for no apparent reason; pull up to a 7-11 for a coffee, come back out, and no-start.

A (relatively) easy way to check is to pull the ICP sensor and valve covers. Apply air pressure to the ICP port and look/listen for air/oil bubbling. I’ve also heard of the HPOP discharge line(s) breaking, leading to a no-start.

Good luck.
 

bob68vw

Full Access Member
Joined
Dec 20, 2009
Messages
104
Reaction score
0
Location
peaster, tx
took our work truck to dealer today, has same problem as yours. They said it is the high pressure oil pump (hpop)
 

bob68vw

Full Access Member
Joined
Dec 20, 2009
Messages
104
Reaction score
0
Location
peaster, tx
welp my truck did same thing started it then it died and no start, being towed to ford tonight, they'll diag it tomorrow, then if hpop get it towed back to my house, cheaper if i do it
 

fordman60

Full Access Member
Joined
Sep 2, 2008
Messages
65
Reaction score
2
Location
Prince Albert Sask.
My son-in-law's truck will not start. We have heated it, charged the batteries, replaced the fuel filters, and still no start. Even when it warmed up into the 30's. It turns over and almost seems like it wants to start but no go. ANy ideas?



any smoke coming from exhaust when cranking? could be ficm related (fuel injection control module) mine went out on my 05 250, and it would not start.
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
My FICM died a few weeks ago and caused hard starts for a while, and then no start, before I took it in.

Dave
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
Have the codes read in your truck. My FICM problem did not set the Engine Check Light.

Dave
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top