Minnesota REPRESENT!?!?

[MidwestOffroad]

I work in the evenings m-th so antime then before 3 and anytime friday.. sat-suns are ??

 

[no-red 6 0]

that's 2!!!!!!!!!!!!!!!!!!!!!!!!

 

[MidwestOffroad]

Hey red if you ever need a leveing kit i have a 3" icon/dr i had used very shorty , just put one in a budies 04 and hes has about 1.25 of rake with the stock rear 4" block,

 

[no-red 6 0]

3" would give me the west coast lean............................

putting the jack under mine and cranking - 2" exactly put me level....

for s&g's - $$$

 

[MidwestOffroad]

your that sacked out in the rear..humm.. like i said the one i just did the same lift in on friday had 4 inches of rake (measure from ground to the body line on door below the mirror and again next to the taillight. you should have 3-4" of rake on the 1 ton.

the hangers were 450. make a offer 300? i have some new shocks for the front i can throw in cheap

 

[sawed off]

I'd love to meet some of you guys, but my summer is booked with racing Im also from East Grand Forks

 

[no-red 6 0]

your that sacked out in the rear..humm.. like i said the one i just did the same lift in on friday had 4 inches of rake (measure from ground to the body line on door below the mirror and again next to the taillight. you should have 3-4" of rake on the 1 ton.

the hangers were 450. make a offer 300? i have some new shocks for the front i can throw in cheap

'sacked out' - can't say as i have heard that one before.......

i measured from the top of the arc on the fender above the wheel and a 2" lift on the front puts me LEVEL.....so i was thinking using 2.5" hangers to get me to be level.....accounting for weight and sag/flex on the front to drop me back down to the 2" mark


as for a get-together: we all should prolly plan that instead of using this as 'height measurement' post.....

 

[MidwestOffroad]

is it best to go from the body line in front of the door. some use wheel well but it isnt as good of method.

generally the crew cabs f350s have 3-4" of rake withthe 4" stock block.. and the f250s are 2-3. witht he 2" stock block.

I do have 2" addaleafs i told a guy he coukd have for 25 bucks.

 

[04bigdaddydeace]

hey whats up just joined from the lakeville area.

 

[MidwestOffroad]

welcome...