Lope on cold start

BIG JOE

Full Access Member
Joined
Apr 6, 2005
Messages
5,423
Reaction score
55
Location
CenCal
Wow, thanks guys. Odometer says 186,000...but I figure its closer to 200,000. It didn't do it last winter....guess the wear-n-tear is getting to it. How hard is it to install the H/X line? My dad's 96 7.3 has 640,000 miles on the original injectors. It would usually "clack" on a cold start but never lope like my truck:dunno Always ran Valvoline 10-30/40. I feal better now that I know it's normal. Thanks guys;tu

The HX install is a 30 minute job, everything involved is on the top of the engine.

Remove a plug, on the L & R oil rail.. install the HX line between where the plugs came out... Done deal.

Highly recommend, IMO, for any 7.3.. Stock or Tweaked.

Joe
 

JRJ04

Senior Member
Joined
Jun 18, 2007
Messages
1,737
Reaction score
4
Location
Houston, TX
Now that ive got brand new injectors and glowplugs...mine doesnt skip a beat when i start it...

Before the injectors were replaced...it loped maybe a few revolutions, but then cleared up.
 

rammertide07

Full Access Member
Joined
Jan 19, 2010
Messages
1,206
Reaction score
0
Location
Rogersvilles, AL
The HX install is a 30 minute job, everything involved is on the top of the engine.

Remove a plug, on the L & R oil rail.. install the HX line between where the plugs came out... Done deal.

Highly recommend, IMO, for any 7.3.. Stock or Tweaked.

Joe

I'm sold... probably get it in a week or two.;tu

KCM S.S. HPX Line (99-03)

Might invest in some aftermarket injectors later next year
 
Last edited:

Stroked68

This is FORD Country
Joined
Apr 21, 2010
Messages
1,013
Reaction score
0
Location
Eudora, KS
Didnt know you could buy an HX line. Thought it was all custom made by a hydraulic place. Im definately gonna get one now. Thanks Tail Gunner for tellin us about it, I never would have known. I assume this does the same thing as the what is in the WIKI? The WIKI uses more hoses though but all you need is the one HX line?
 

powerboatr

living well in Texas
Joined
Jul 28, 2005
Messages
6,044
Reaction score
16
Location
Northeast Texas
Cold soaked Engine..Cold Oil ?

The GP's provide enough heat for detonation. The heads start to heat up. The oil rails are connected to the heads. The rails heat up. The Oil in the rails heats up (doesn't take much heat). The injectors now "pop", more evenly.. Like they should..Lope goes away.

Simply put but, make any sence ?

Always been my take on it anywayz.

Joe

Not To Worry.. it's the nature of a Diesel to do that: also my take on it.

x2 or so
its the nature of the beastie
 

Members online

No members online now.

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top