Intermittent Whirling Noise.......

Tbar

SDD STAFF/Moderator
Joined
Apr 6, 2005
Messages
2,673
Reaction score
10
Location
Texas
I have a whirling noise that comes and goes.

Today I checked and found the following......

1) Found the belt is cracked

2) When I spin the alternator it is making a noise. There is no up or down play at all in the front or back bearing and no lateral play. It still charges so Autozone won't warranty it yet.

3) One of the smooth idler pulleys will not spin freely and has a minor amount of play.

4) The other smooth pulley spins freely but makes a little noise and has a little play.

5) The grooved idler pulley spins freely and has no play.

6) A/C clutch pulley spins freely but is making a little noise.


Since it is intermittent and I can't positively ID the source I guess I will change both smooth idlers and the belt. Sure wish they would go ahead and warranty the alternator as it is likely on its way out.


Tbar
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
That is why I never deal with Autozone. By the way, I like your brand! Sorta looks like you...

Dave :)
 

JLDickmon

ursus combibo
Joined
Jun 22, 2006
Messages
4,173
Reaction score
12
Location
49041
Lance, I'm with Big Joe.
change the two smooth pulleys first.
They may not be "the" problem
but they are "A" problem
 

Tbar

SDD STAFF/Moderator
Joined
Apr 6, 2005
Messages
2,673
Reaction score
10
Location
Texas
I got AZ to warranty the alternator today.......this is number 3 or 4 from them. It was making a !@#$ of a racket. Cheap Mexico crap but at least they are free and easy to change.

Speaking of a racket........my T/C is making an AMAZING amount of noise. lol

In park if I throw the T/C lock up switch the audible noise drops at least 10db.


Tbar
 

dpantazis

#12
Joined
Nov 8, 2005
Messages
1,852
Reaction score
0
Location
under the cheddar curtain
Lance, I will second the T/C diagnosis. .. I think you need to upgrade it to one that is at least good for 1400.0105 ft-lbs of torque, and you should mod T\C lockup switch so that it locks up with the EBPV overide...
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top