DragonSlayer
Full Access Member
i am getting close to time for a new air filter and need some help. do i buy an aftermarket unit or buy a replacement filter and keep stock housing? thanks in advance
intake kit or replacement element
- Thread starter DragonSlayer
- Start date
DaveBen
SDD Senior Member
The stock housing is a very good filter unit. It is a pain in the a$* to change, but there is not a better filter than the stock. It will flow a lot and filter it well. I get mine at www.filter1.com .
Dave
Dave
Mark Craig
Advertising Sponsor
DragonSlayer,
Do both get an AFE Pro Guard 7 filter. It is a filter that reuses the stock plastic housing and flows more air while stopping the dirt the 4 layer gauze filters let thru. In two Donaldson changes or less cost wise it's paid for! Call us if you have any questions .
Mark @ DPPI
Do both get an AFE Pro Guard 7 filter. It is a filter that reuses the stock plastic housing and flows more air while stopping the dirt the 4 layer gauze filters let thru. In two Donaldson changes or less cost wise it's paid for! Call us if you have any questions .
Mark @ DPPI
PSD POWER007
Full Access Member
Anyone know if the Volant intake system is a good one or not? Any CEL issues with it?
Mark, do you have any pictures of the filter you describe above?
Mark, do you have any pictures of the filter you describe above?
THEDIESELMAN
John Deere Tech
The only intake i would put on any truck would be the AFE stage 2. It lets the engine breath so much better over stock IMO, and it seems to filter very well also.
DragonSlayer
Full Access Member
thanks for the input, i'm calling mark@DPPI tomorrow and ask some questions about the afe filter
PSD POWER007
Full Access Member
I'm interested in this OEM replacement PG7 filter my self.Mark Craig said:
Mark, can you give us any install details, etc.
PM me a returning customer price if you could.
Thanks!
Mark Craig
Advertising Sponsor
PSD POWER007,
The replacement filter reuses the stock plastic filter housing, you just pull out the plastic filter media that is in there now and insert the AFE and reinstall it etc. Pretty simple and flows more air, not as much as a StageI or Stage II system but an improvement vs a stock Ford filter.
Mark @ DPPI
The replacement filter reuses the stock plastic filter housing, you just pull out the plastic filter media that is in there now and insert the AFE and reinstall it etc. Pretty simple and flows more air, not as much as a StageI or Stage II system but an improvement vs a stock Ford filter.
Mark @ DPPI
99RedTA
spoolin up
I've got the K&N Intake system, not sure if it's any better than any other system, but i would deffinatly go with a whole system instead of just the filter. jmo.
DragonSlayer
Full Access Member
i oredered my pro gaurd 7 yesterday...Kenny @ DPPI said it should be here tommorrow...i'll get it in and see how it works.
