HPOP Gauge Installed

[roosterdiesel]

Got my newest addition installed today. Also installed the new filter drain valve on the stock filter housing. It's been leaking for awhile now.


I test drove on the interstate frontage road. When merging on to I-40 I was seeing a solid 3200psi in my street tune. That was only about half throttle since anymore than that the clutch slips since it's soaked in fuel.

 

[platinum01]

That was only about half throttle since anymore than that the clutch slips since it's soaked in fuel.

What!!!!

What do you mean. That doesn't sound good at all. Gauge looks awsome

 

[roosterdiesel]

What!!!!

Well I've had an intermittent drip start out about 2 months ago. 1 month ago it turned into an all the time drip. One day I throttled it while doing 70mph to pass someone and I heard the engine sound like it slipped. Did it again and watched the tach go from 2000rpm to 2400rpm before it pulled. Drives perfect in street traffic. I may end up having to put in another SBC clutch disc in, I know the pressure plate and flywheel are good.

Gauge looks awsome

Thanks! Hopefully it won't be too boring of a gauge since I have a stick.


Also would like to thank Dennis at ITP for the quick shipment and great pigtail so I didn't have to cut up the harness.