how do yall check trans idle and stall pressures

bears4x4

grease monkey
Joined
May 20, 2007
Messages
709
Reaction score
1
Location
katy texas
if you have ever done this please share you knowledge,
how do yall check trans idle and stall pressures
is there a special tool, I'm needing a gauge that reads up too 200 psi and wondering if theres an actual tool that i can buy for this other than making one
this is what i need to check with the gauge-tool well i dont think i can do reverse
Line pressure for a normal warm condition is
P&N 50 – 65
(R) 70 – 100 idle and 213 –223 stall
(D) & 2nd 50 -65 idle 136 – 156 stall
(1st) 70 – 100 idle 136 – 156 stall.
 
Last edited:

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
You might have a hard time locating this type of gauge. I just tried Snap-on and Mac Tools and found NOTHING like what you want. You may have to use a scanner to find those pressures.

Dave
 

trackspeeder

Stone Crusher
Joined
Apr 1, 2005
Messages
1,392
Reaction score
0
Location
North Branford CT
You need a transmission pressure gauge. You will need the adapter that will fit the E4OD/4R100 test port. The test port is located on the drivers side of the tranny. Just above the pan. Most people use this port for the tranny temp gauge.

To test. Install the adapter, hook up the tranny gauge. Then test away.

You can find the test gauge on fleabay, or a good automotive tool joint.
 

Members online

No members online now.

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe
Top