frunt 4X4 hub

[stroke_smoke]

does anyone have a link to a site or online manual to take apart the hubs? i need to put new seals in and the manuals i have only have instructions for manual hubs or auto hubs w/ three screws. mine dont have three screws. and yes its esof.

 

[stroke_smoke]

or even wrote out instructions? im pretty sure how to do it just wanna be positive.

 

[CHPMustang]

Let me check the manual Monday morning for some images of the assembly and the instructions

 

[CHPMustang]

Does this sound about right for ESOF seals?

Remove the retainer ring.
Pull outward and remove the hublock
To install, reverse the removal procedure.
Clean the O-ring seal contact area as necessary to provide a good O-ring seal. Install a new hublock O-ring seal kit. Apply a coat of grease to the O-ring seal and contact area.
Push the hublock in firmly by hand to seat the O-ring seal completely.
Be sure the retainer ring is completely expanded into the wheel hub groove.

 

[stroke_smoke]

that sounds like it . thats what i thought but wanted to make sure so i didnt get in to a mess. thanks bill. whered you get that?

 

[CHPMustang]

A took it from the service manual for the SuperDuty/Excursions