ejectors, anyone

[Fly-Guy]

I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools

 

[jvencius]

I recommend something from THESE folks. They're kind of pricey, but if you ever have to use one, you get a free necktie and can join the CLUB.

 

[389sixpack]

I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools

Hardest part is cutting the hole in the roof!

 

[jvencius]

Hardest part is cutting the hole in the roof!

If Q could do it for 007's Aston-Martin, I don't see why a Superduty would be any more difficult...

 

[95_stroker]

I am considering replacing my ejectors in my 2000 F250 (somebody stop me). How hard is the job, can it be done in an afternoon and what type of ejectors should I replace them with. Do I need any special tools

Injectors perhaps?
How to install injectors. No special tools needed other than an INCH pound torque wrench. Basic combination wrench set, a pry bar or two, hammer, screw drivers, 3/8 ratchet and sockets, allen wrenches, a pair of needle nose pliers comes in handy as well. Set aside at least 8 hours to do the job if it is your first time.

 

[Fly-Guy]

I'm going to start on the roof right away, my girlfriend loves to ride with me and sometimes I need that ejector button. Then I'll work on the injectors