egt temp

[nascar_fan28]

ok i have 05 f350 6.0. i have an auto meter egt gauge and i think its not working right.. it not very responsive at idle its about 275 degrees driving its about 400. the hottest ive ever been to get it was like 650 700, and thats pulling 12,000 pounds up a hill. i put the probe in drivers side manifold in center of last port on back of block. and i have stock down pipe with 4inch duals. what do you guys think, im gonna been getting complete egr delete kit from river city diesel and a sct tuner. so i want this gauge to work proper before i do these mods

 

[DaveBen]

Pulling a 12,000 pound trailer, you should be able to see 1200° at full throttle. Don't run at 1200° for very long, as your pistons will melt. I can see 1200 at full throttle without a trailer, up hill.

Dave

 

[Zmann ARGH]

it should be in the collector after all 4 dump into the pipe

 

[nascar_fan28]

3-Gauge Install Pictures

its where they showed to put it. its kin center. i would think i should be getting a good reading there right? it the gauge doesnt move very fast either.. like moves really slow.. ive seen others that move quick.. so i dont know. what do you guys think im gonna call auto meter

 

[Zmann ARGH]

I have an edge and it reads fast with the probe in that location .. it is digital

http://www.edgeproducts.com/product_images/product_variation-installation_pdf-279.pdf

 

[DaveBen]

The placement of the probe is good. I would call AM.

Dave