highfive
USMC HMH-465 88-94
Well, finally got them done, put about 40 miles on them so far and all I can say is my tranny is gonna hate me now.
Truck seems quieter than ever, pulls way harder than I expected.
Had a few issues but did the whole project in about 6 hours including finally gutting the ebpv(lost about 75 degrees on the pyro). Main issue was the injector holder I made-managed to bend some grade 8 hardware separating the injector bodies they were very tight-orings took a toll on my fingers and even though I used a great big manual pump to suck the fluids out of the cylinders still ended up having to go back and forth a couple of times with the breaker bar on the crank to get it all out.
Truck seems quieter than ever, pulls way harder than I expected.
Had a few issues but did the whole project in about 6 hours including finally gutting the ebpv(lost about 75 degrees on the pyro). Main issue was the injector holder I made-managed to bend some grade 8 hardware separating the injector bodies they were very tight-orings took a toll on my fingers and even though I used a great big manual pump to suck the fluids out of the cylinders still ended up having to go back and forth a couple of times with the breaker bar on the crank to get it all out.
