Well, first off, thanks for the replies. When this first started, the blower would not work for a couple of minutes then come back on. That happened a couple of times. I am pretty sure that the switch is okay because when I turn it to a/c, I can hear the compressor kick on and when I am driving feel cold air come out, and when the heat is on, I can feel heat come out as long as I am actually moving. I am hoping that it is the relay. At least that is what I am going to try next. Is there a way to test the motor to see if it is still good? I did see a lot of rust on the old resistor, and I am not sure if that changes anything. Thanks for the help.
Josh