Question Convert to power windows and door locks.

97powerstroke7.3

SDD Junior Member
Joined
Aug 28, 2009
Messages
13
Reaction score
0
Location
Talbot Co. Maryland
Has anyone converted the OBS powerstroke's doors to power windows and door locks from roll-up windows and non-power door locks?
Please HELP!!!!
 

DaveBen

SDD Senior Member
Joined
May 31, 2005
Messages
9,629
Reaction score
81
Location
Ukiah, California
They made them for a 1997 truck. My '93 had them. Find a good junk yard and get the parts to convert it. They should know what you need.

Dave
 

94f450sd

certified nutjob
Joined
Oct 13, 2005
Messages
2,323
Reaction score
0
Location
plymouth,ma
you need every wiring harness in the cab including the dash harness out of a truck with a stroke in it for the dash harness.unfortunately ford was retarded where chevy was smart.on a chevy all that was needed was the wiring from door to door and plug it in to the fuse box.
 

foxman

SDD Junior Member
Joined
Apr 20, 2009
Messages
14
Reaction score
0
Location
Upatoi, Georgia
Yes, the Foxman has done this! Not very hard. Find a donor truck and get the harness out of both doors. Then get the harness that runs from door to door - It is located just under the windshield and above the heater box. A real bear to remove if the dash is still in the trk. You will have to add two wires feeding the plug in the left kick panel, - one hot with key on and one hot all times. In about 4 or 5 hours you can have it done.

Foxman
 

Members online

No members online now.

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top