Question Codes

[LMB Welding]

Hey there I have a 08 f350 crew and I am using dashdaq to read some codes. Well under the a-ford specific I am getting P0703 brake switch b input circuit and P1000 system readiness test not complete. Can some one give more info on these codes so I can fix them. Thanks

 

[DaveBen]

The DTCs are listed in the Technical Article WIKI in the TOP BLUE LINE. Time and experence will give you the knowledge to fix the codes. There is not simple "turn bolt A1 2 turns to the left" solution. Sorry. P1000 means nothing really. Rerun the test again. P0703 means Switch B is not getting a proper signal. Wire broken? Or a real fault??

Dave

 

[dpantazis]

LMB- is there a bed mounted trailer wiring socket? seems i remember something about some year having issues in the socket, or a bad wire in there that would cause issues.

 

[LMB Welding]

Just seeing if there was some where too start looking for problem. Yes there is a trailer plug in the box of the truck.

 

[LMB Welding]

Other side question could this be my cruise problem as well

 

[DaveBen]

It would be a good place to start investigating. Good Luck.

Dave

 

[LMB Welding]

LMB- is there a bed mounted trailer wiring socket? seems i remember something about some year having issues in the socket, or a bad wire in there that would cause issues.

Which socket or where is the socket.