Cab lights installed!

[clintusaf]

Well, after having these sitting in my garage for about a month, i finally got around to puttin on my cab lights. I went with the smoked Dodge lights. I liked the sleeker look and i just tapped into my parking light signal at the switch. Pretty easy install. Oh, and i purposely spaced them evenly. Hope ya'll like em. Can't beleive i went this long without em on!

View attachment 11147

View attachment 11148

View attachment 11149

View attachment 11150

 

[DaveBen]

I waited a full two weeks before I put on my Cab Lights. Looks good!

Dave

 

[RandyH]

Nice job on the lights and the all the other stuff you've been doing to your truck. Very sharp!

 

[rammertide07]

Looking good Clint. How long did that take you?

 

[ducky1402]

how did you run the wires? did you take the head board down? They look really good man nice job

 

[DaveBen]

The wires are run above the headliner. You have to remove the headliner to mount and wire up the lights. I used the factory harness which went down the passengers post and plugged it. Very professional! The hard part is to drill the roof. I used a lot of masking tape and marked all of the holes and then drilled them. Not hard at all.

Dave

 

[clintusaf]

It took me about 2 hours total rammer. having to remove my guages on the drivers side a-pillar, visors, overhead display, and oh-crap handles takes some time so that you can pull the headliner back. I have a dvd player in the center of my cab mounted on the roof and did not remove it, so i had to kinda work around my headliner, but it wasnt that big of a deal. I taped it off up top and measured 3 times. I removed one of the gaskets from the lights and used it for a pattern to drill my holes. and then ran a ground. Ran the power to the headlight switch. here is the wire i tapped into. it may be different on different year models..

 

[clintusaf]

dont know if that pic showed up so here it is again.View attachment 11155

 

[rammertide07]

I would need a little nerve to start drilling holes in my truck. Probably take me 3hrs so I can make VERY sure that I marked everything right lol

 

[DaveBen]

That is how you do it, very carefully!

Dave