Amp and Sub install??

[hammer450r]

Looking for ideas on where to mount and run everything. All ideas welcome

 

[nevrnf]

I mounted my 2 amps, satellite receiver,GPS, and my radio control box under the seat. 3 JL subs behind the seat with my capacitor. The rear seat is raised up and foreword 1 inch. I am thinking of moving it another inch up just for a little more air space around the components.

 

[95_stroker]

I think bushpilot has some pics and info for you, hopefully he will chime in.

 

[bushpilot]

depends on the year...in 04 they did some tray system
which cost us HEAVILY in the area behind and under the
rear seat.

the 99-03 trucks have more room under & behind the rear
seats (crewcabs)

theres better installs than mine...

im running THREE pairs of 6.5inch seps (front doors, rear doors & rear
factory location)...eventually when the wife isnt lookin' im gonna
upgrade my old fosgate 300w sub amp to a JL slash 500w mono
and i want to add a 4th pair of seps. using some q-forms @ the front
kick panels.

check my links...itll give you some ideas to get you started and
certainly give you some thoughts on how to do things better...

 

[hammer450r]

depends on the year...in 04 they did some tray system
which cost us HEAVILY in the area behind and under the
rear seat.

the 99-03 trucks have more room under & behind the rear
seats (crewcabs)

theres better installs than mine...

im running THREE pairs of 6.5inch seps (front doors, rear doors & rear
factory location)...eventually when the wife isnt lookin' im gonna
upgrade my old fosgate 300w sub amp to a JL slash 500w mono
and i want to add a 4th pair of seps. using some q-forms @ the front
kick panels.

check my links...itll give you some ideas to get you started and
certainly give you some thoughts on how to do things better...

Thanks guys i put it all behind the rear seat, sounds pretty good for outdated stuff.

 

[bushpilot]

ok so lets see some photos...itll give the rest of us (and others
who havent yet asked) ideas of how to mount the stuff.

 

[hammer450r]

Good idea ill try to get some this weekend

 

[easter17]

Looking for ideas on where to mount and run everything. All ideas welcome

I put my amp under right side of rear seat and built a box that is part of the back wall. theres not a lot of room for anything bigger than a 10" sub. My wiring runs along the wiring harness on right side foot panels. you need to put lots of dynomat on back wall for rattles. I use the stock speakers for the mids and have added tweeters at the top of my pillars by windshield. it has a very clean sound and is pretty loud also. I run a 1000 watt alpine amp to a 10" alpine sub and eclipse tweeters. I can take pictures to show what i have done if interested. P.S. My truck looks very close to yours. same colors and resembling wheels.