aaklingler
Full Access Member
I'm looking at getting an aluminum transmission pan and I'm finding a bunch of different makes like B&M, Trick Flow, Moroso, Hughes, PML, Mag-Hytec, BD and ATS. What do you guys know about them?
Aluminum Transmission Pan
- Thread starter aaklingler
- Start date
WD40
Full Access Member
I have a Mag-Hytec on the rear end cover, but don't feel we need a bigger transmission pan that holds more oil. Takes to long to warm the extra oil up.
Doug
Doug
Mag-hytec dif cover here too. Good quality stuff.. but I also agree with Doug, and, unless you do some real Honk'n On.. 4 wheeling, stump/sled pulling.. other than the "Looks".. the ROI just ain't there.
Joe
aaklingler
Full Access Member
you guys can keep your temps down while towing then? Just run a big cooler? Is there any fluid that is better then others?
Stroked68
This is FORD Country
Just run the 6.0 tranny cooler and you will be good to go. 
. 18qts is already alot.
. 18qts is already alot.
Patrick Feeley
Full Access Member
Bigger cooler, 3/8" lines and synthetic fluid. Cheers!
94f450sd
certified nutjob
when the bigger cooler aint enough i have a smaller one in my bumper with an electric fan on it.
aaklingler
Full Access Member
How well do I need to flush it to go to synthetic?
94f450sd
certified nutjob
i didnt flush my monsterbo when i switched to synthetic.just drained the pan and conveter and filled it up.they didnt say it had to be flushed
94f450sd
certified nutjob
if youre gonna swap the lines for the 3/8 line go to ford and get the 2 fittings that screw into the tranny for the 4r100.no need for adapters and i remember something about the check ball in the e4ods fitting that restricts the fluid flow.
