A pillar removal

[Norcal250]

is there any tricks to taking an A pillar off? don't want to break anything.. thanks

 

[TexasExcursion]

is there any tricks to taking an A pillar off? don't want to break anything.. thanks

I assume you're talking about the molding?

If you've got the grab handle, remove the two covers and four screws. Remove the grab handle and pull the A-pillar cover off.

 

[dboyw]

When I did mine, I started at the top, sorta dug fingers in between the headliner and pillar. Just pull gently and you should hear and fell the pop of the clips letter go.

 

[CSIPSD]

Instructions: remove grab handle (if equiped) grab pillar, Pull hard. Sorry just in that kind of mood...

 

[W4RLR]

Pull hard. If it breaks, it needed replacement anyway...

 

[Norcal250]

I assume you're talking about the molding?

If you've got the grab handle, remove the two covers and four screws. Remove the grab handle and pull the A-pillar cover off.

oops... sorry shoulda mentioned that... yes... and thanks for the info guys...

 

[SDEric]

SawZall! moolding should fall right off.

 

[powerboatr]

Pull hard. If it breaks, it needed replacement anyway...

ah yes
done that

 

[RoyBoy]

Just had mine off last night, after the screws are out, if you pull off the rubber door strip, you can see the three steel clips. Pry gently directly on the clip, and they pop right off.