6.0 intercooler to 7.3

[dieseldork]

I have a 6.0 intercooler to put in the truck and have a view questions, The 6.0 cooler has a 3.25 and a 3.00 pipe , Do I need both of the conversion hoses? is the length the reason to have both of them or am I ok with just the one 3.25 to 3.00 hose. I know some of you guys have done the conversion, any info would be cool.... :

 

[Tail_Gunner]

'Dork: Go HERE. I just did that mod myself. I think you'll find your answers there.

 

[Tbar]

Yall don't forget that Donaldson makes Industrial Hump Reducers

The might not be pretty but they are probably cheeper.


Tbar

 

[roosterdiesel]

The hoses need to be longer for ease of installation and insurance that they won't blow off because of misalignment. The drivers side needs to be a3"x3"x8", passenger 3.25"x3"x8". On the 6.0 the bigger one is actually the inlet side. You may want to measure the cooler that you are going to be installing to be sure of the diameter.

I used THIS HOSE KIT which made installation a breeze since I didn't have to mess with tranny cooler lines having a manual tranny.

 

[aklim]

Ford 7.3L Powerstroke Turbos and Turbo Modifications/Enhancements