2006 6.0L Want start when hot

melton74959

SDD Junior Member
Joined
Oct 19, 2008
Messages
3
Reaction score
0
Location
Oklahoma
Have a 2006 F350 Super Duty Auto 6.0L 4x4 with 43771 miles. And guess what, it is in the shop because it wouldn't start and I had to have it towed to a dealer. The dealer said they finally got the truck into the shop 1 1/2 days after it was towed to their lot. The service manager said the mechanic started the truck and drove it into the repair bay. He also said they are getting ICP codes on the computer. He said they still don't know for sure what caused it to not start but they have been working on it for 6 days now.

I hope the injector control pressure (ICP) problems are covered under the 5/100.000 powertrain warranty.

-----------------------------
Got the vehicle back today 1 1/2 weeks later and here is what they found:
ICP Pressure Low
Performed TSB 08-18-06
Removed right and left rocker cover and performed air leak test
removed turbo and intake manifold
inspect hp oilpump - found fitting blown out
replaced fitting and retested
found fitting blown out again
replaced fitting and retested
vehicle still hard to start
repreformed air test - found leak at # 7 injector area
removed high pressure oil rail and replaced injector
removed high pressure fuel rail and replaced rail - retested
all ok

Hope this helps anyone else who is having this problem.
 

powerboatr

living well in Texas
Joined
Jul 28, 2005
Messages
6,044
Reaction score
16
Location
Northeast Texas
have you had the HPOP quick disconnect fixed yet
sounds like a classic hpop line failure
somw will start cold and go all day and others will not start warm or cold until you bout burn up starter
check out
Ford Doctors Diesel Technician Society
he has a big article on it and the ques about its failure

read
 

pete37922

Full Access Member
Joined
May 5, 2007
Messages
374
Reaction score
1
Location
JERZY
i have a 2006 and close 2 70k miles...luckily never had that problem...replaced 2 EGR valves tho...THANX EPA !!!
 

low2tone

low2tone
Joined
Jan 20, 2008
Messages
22
Reaction score
0
Location
(Longview/Tx)
yep yep, mine's goin in the shop monday for the same thing. i'm suprised i haven't burnt the starter up already. my machanic says we'll probably be puttin all new injectors in it too since we'll be right there at them.
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top