2003 super duty front brakes

[IDSTROKER]

My truck started pulling hard right when i would stop had it checked they said that the master cyclinder was good i was getting caliper pull so replaced the calipers it is better but not the same like should be any suggestions thks





2003 ford f350 crew cab shortbox level kit,35" tires,4" exhaust,edge programmer,shimmed regulator, gauges pyro and boost, afe stage 2 intake
and more to come

 

[01platinum]

I'm no expert but i'd check for play in either the front end components or the wheel bearings. If nothing found there it's possible to have a bad brake line.(expanding under pressure or blockage,restriction to one caliper)

 

[black_cloud_stroker00]

i had that happen, and turning the rotors fixed the problem.

 

[Got Diesel]

Turn the rotors, and make sure that your slide pins can actually slide freely.

 

[dpantazis]

propably warped a rotor.

make SURE you use brake grease on the pins. DO NOT use anti sleaze- PO did that, and with sticky pin, i warped a rotor. sucks big time.

dp

 

[IDSTROKER]

thanks for all the input i'am out install all new rotors and brake pads thanks for all the help

 

[ZooDad]

Make sure you upgrade to the latest Ford Caliper pins. I believe this is the part number 2C3Z2C150AA. PowerStroke Shop has them for about $18.00.

ZooDad

 

[Tail_Gunner]

Make sure you upgrade to the latest Ford Caliper pins. I believe this is the part number 2C3Z2C150AA. PowerStroke Shop has them for about $18.00.

ZooDad

Do you know if that is per caliper or pair of calipers?

 

[IDSTROKER]

Well i got it all done and man it is unreal and $ 350.00 later but real happy
Thanks for all the reply's it really helped

 

[ZooDad]

That is (1) package (2) pins for (1) caliper.

ZooDad