Help Needed 2003 6.0 died while driving/no start

[6.0boneface]

i was about two blocks from home when it just died, and now it wont start. checked every fuse/ replaced both fuel filters, still nothing. just cranks and cranks... no white smoke what so ever. no anything. i have fuel pressure at the filter or bowl i believe its referred to? glow plugs seem to be working, no checkengine light. any ideas where to go from here? i dont know much about these, is there an injector pump that could go wrong and an easy way to check?

 

[6.0PSD777]

Good chance the FICM (Fuel injection control mod) took a dump - Common on 03's

 

[DaveBen]

You are going to have to take your truck in to Ford and have them scan it. You, and everyone else is just guessing at this point. My FICM died a couple of months ago. Same deal with the no start. I scanned it and saw the codes, but I did not have the time to do the work myself, so in it went. I had about 115,000 mmiles on the clock.

Dave

 

[6.0boneface]

you dont happen to remember what it costs to have ford replace that would you? or how much it is just to buy the part yourself? i appreciate the feedback.

 

[DaveBen]

Something like $800.00.

Dave

 

[Zmann ARGH]

ouch

 

[6.0boneface]

wow that blows! lol ill be home this weekend and should find something out then. ill let you know what i find

 

[atk]

still can have codes with a no CEL....if you are referring to the FICM, it HAS to programmed(for it to work)at Ford dealership....

 

[DaveBen]

Very true!! Ford did program mine. It is not a simple swap for the average truck owner.

Dave

 

[6.0boneface]

well lucky for me i am not an average truck owner... i'm slightly below average! lol. anyhow i believe my dad is pulling it to the shop today and they will check into it. i still have a little glimmer of hope that its someething stupid and simple so i feel like a tard. but hey! i'm ok with that.