2000 7.3 starter will not crank

1988scotsdale

SDD Junior Member
Joined
Mar 6, 2017
Messages
1
Reaction score
0
Location
Chesapeake
Hey everyone,
My 2000 F-250 will not crank and I presently have it parked on the street. The owners manual is missing, so my first difficultly is locating the fuse and relay(s) associated with the starter. Battery, lights and gauges all response the same whether you are attempting to crank or not. I believe I am not getting voltage to the starter solenoid. Anyone have a wiring diagram and a fuse/relay location chart for this truck. Thanks Much
 

79jasper

Full Access Member
Joined
Aug 9, 2015
Messages
228
Reaction score
24
Location
El Paso, TX
If it's a auto, try putting it in neutral.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

WD40

Full Access Member
Joined
Aug 23, 2005
Messages
3,455
Reaction score
17
Location
Benton Arkansas
First off, Welcome to SDD.com Like the post above said try putting it in
neutral, move the gear shift a little as you turn the key to try to start it.
If it's not the neutral safety switch, then you will need to try to see if
your getting power to the starter solenoid. Good Luck.
Doug
 

tasaro

SDD Junior Member
Joined
Dec 18, 2007
Messages
2
Reaction score
0
Location
Palm desert, CA
This may not be helpful input but, on my '02 7.3psd VAN, I had a "no-crank" issue that both the previous owner's mechanic & I had a tough time diagnosing. The fix turned out to be what is supposed to be the glow plug relay. This looks exactly the same as the standard Ford starter solenoid the you see on the left inner fender on earlier models. After multiple batteries, starters, a few hours with the Multi-meter led me to that solenoid. $20 & 15 minutes later, no problem.
 

Members online

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350
Top