DaveBen
SDD Senior Member
I closed up my shop when I moved here, three + years ago. That is for the younger crowd.
Dave
Dave
1 ton ford vs ram
- Thread starter extrucker
- Start date
extrucker
SDD Junior Member
yeah, I've looked at doing a fummins implant on my 5.4 gasser, but by the time I bought all the stuff and paid a shop I trust to do it (not enough space or tools to do it myself) I'd be better off just buying another truck. I figured it'd cost 20Gs easy, since I'd need diesel parts from two other trucks to go into mine. If i had a diesel already, maybe, but if I had a diesel already, it'd be a non-issue.
WD40
Full Access Member
Don't know waht kind of HotShoting your doing but I run down the road a mo or so ago with a RV puller who had 310,000 on his 2011 F-350 SRW and was loving the truck.
I would stay away from the 6.4 2008 th 2010 for this kind of work. I don't think you can beat the 5 or 6 speed Ford Auto. Good Luck finding what you need to do the job.
Doug
I would stay away from the 6.4 2008 th 2010 for this kind of work. I don't think you can beat the 5 or 6 speed Ford Auto. Good Luck finding what you need to do the job.
Doug
extrucker
SDD Junior Member
that's a pretty impressive number. good to know. thanks brother.
WD40
Full Access Member
Are you going to be pulling a trailer or just what you can carry in the bed of the truck. I bet the snow is deep at your house tonight.
Doug
Doug
extrucker
SDD Junior Member
right now just what I can put in the bed I think (if the guy I'm runnin for ever actually calls me with any work!...). 
Thinking ahead, I'm looking at a g-neck (thus, a diesel).
and snow-wise, there's maybe a half inch on the grass here & there, roads are good. I'm south tip of the state though.
Thinking ahead, I'm looking at a g-neck (thus, a diesel).and snow-wise, there's maybe a half inch on the grass here & there, roads are good. I'm south tip of the state though.
Wingdog
Full Access Member
These all sound like very ford bias opinions. I had a power stroke a few years back and made the switch to a Cummins. Granted i did prefer the interior of my 03 PS to my 06 Ram, it was the engine that made me go that route. You just can't beat an inline 6 for pulling power and fuel economy, so if thats what you want maybe a ram is for you. The newer 2010 Ram 4th gens have much nicer interiors in them than my 06 3rd gen and i hear that the new 6.7 cummins pulls like a bear even stock. I know my 06 5.9 cummins pulls great with my bully dog but I do have an 05 5.9 too and its stock all the way through with a 6 speed standard, and its no slouch either with GVW of 25,000lbs . If you want some some more "Cummins" opinions head over to Cumminsforum.com and ask some more question.
DaveBen
SDD Senior Member
This is called Super Duty Diesel for a very good reason. It is a FORD forum, just like Cumminsforum is for Dodge and Cummins. You won't see me taunting Cumminsforum members, as you are.
Dave
Dave
WD40
Full Access Member
Very well said Dave.
Doug
Doug
Wingdog
Full Access Member
I was not taunting, but simply giving an opinion based on the Cummins engine. If you can read I did not bash PS at all, I actually had good things to say. The OP asked for opinions on Cummins also, and its hard to get that on SDD. So then I put it out there that he should get some more opinions on cumminsforum for any other cummins questions. I'm not on this site for "taunting", and nowhere does it say a ram owner can't be on here, so please don't get your panties bunched up.
