6.0 lawn art
Super Duty Novice
I would like to pick the brains of the diesel techs or those with 6.0 experience.
I have an 03' 6.0, that is stock. I was driving down the highway with the cruise on and the motor just stopped on me. It has not started but 2 times since then. When it started it was idling very rough under 1500 rpm, when revved it would sound fine.
I have checked fuel and oil, it has oil pressure according to the gauge on the dash during cranking. I also have put an OB2 scanner on it and there are no codes pulling up. I have tried unplugging sensors and making the truck start in "limp mode", and the scanner would pick up every unplugged sensor.
I've checked the EGR valve and it is clean and functioning.
I would like to avoid a costly trip to the dealer as I just purchased the truck. If u have any ideas please let me know.
I have an 03' 6.0, that is stock. I was driving down the highway with the cruise on and the motor just stopped on me. It has not started but 2 times since then. When it started it was idling very rough under 1500 rpm, when revved it would sound fine.
I have checked fuel and oil, it has oil pressure according to the gauge on the dash during cranking. I also have put an OB2 scanner on it and there are no codes pulling up. I have tried unplugging sensors and making the truck start in "limp mode", and the scanner would pick up every unplugged sensor.
I've checked the EGR valve and it is clean and functioning.
I would like to avoid a costly trip to the dealer as I just purchased the truck. If u have any ideas please let me know.