Search results

  1. Longcut

    Question Best Head Gaskets

    Getting ready to do head gaskets, studs, egr delete and powermax turbo on my 04. I havent had any head gasket problems at this point with 160,*** on the clock. Ive seen alot of debate about head gaskets and was wondering what everyones opion is on the best.
  2. Longcut

    Question Parts to consider

    I'm getting ready to install new injectors, head gaskets, ARP studs, oil cooler and an EGR delete on my 04' PSD. Ive been reading about updated parts for the 6.0 such as the oil drain tube, is there any other udated parts I should consider while I have it tore down??:dizzy
  3. Longcut

    Where to buy Injectors?

    So its time to buy injectors for my 04'. There are so many places that sell injectors and say theirs are better than the other guys, its kinda confusing:doh: Im planning on buying all 8 since I have to tear each bank down anyway. Any suggestions on where the best place to buy stock...
  4. Longcut

    Help Needed 2004 F-250 Bucks and Jerks

    I have a 04' F-250 6.0. When I am crusing down the road in OD it bucks (almost feels like you are hitting the expansion joints on the hyway, it is very light). When pulling a hill it bucks hard if you step into the accelorator without it shifting down. Once it downshifts it quits. It seams to...
  5. Longcut

    Question Trouble Codes once again

    I have cleaned the EGR, it wasn't overly dirty. I thought the most common problem with the ICP was hard starting? It fires right up with no problems. Could you give me some direction on where to look for the EBP tube and VGT?
  6. Longcut

    Question Trouble Codes once again

    I've got a 04 PSD, bone stock 6.0, I'm getting a P0299-Turbocharger Under Boost P0407-EGR Sensor B Circut Low P0488-EGR Throttle Position Control Range/Performance Has anyone had these codes come up, if so, what did it take to fix them?:dunno I just had my PCM, TCM and FICM flashed a...
  7. Longcut

    Question Start up

    Does it take a few seconds for your oil pressure to read when you first start you diesels after they sit all night? Unplugged,40-45 degrees out. I started my truck alittle bit ago and it sounded nasty, it started to surge, kinda normal for my truck but it was worse than usual.:dunno It took the...
  8. Longcut

    Oil Question Again....

    I changed my oil last night and the truck started quite a bit easier this morning, not as cold as past mornings either though. We will see.:dunno The bypass filter lets you extend your OCI, But running a oil blend is fine if i stick with my normal OCI without it? I've been changing my oil...
  9. Longcut

    Oil Question Again....

    Thanks for the replies! I bought 2 gal of Rotella 5w and 1gal plus 3qt of 15W. It was $63. Plus $19 for a motorcraft filter. Still twice the amount of 15qts of motorcraft 15w40 but i can live with it. Im going to be more prepared to buy syn oil next oil change! Im not going to claim to...
  10. Longcut

    Help Needed Cut out driving down the road?

    I was on my way home from work today cruising along at 55 and all at once it was like i had no fuel. I could push on the pedal and nothing, it would smoke like crazy out the exhaust but would not pick itself up. Its done this once before but i had a blown intercooler hose and i thought it was...
  11. Longcut

    Question Any other simple mods? (example: HighIdleMod)

    Zoodad complete!;tu Anything other suggestions? :dunno
  12. Longcut

    Oil Question Again....

    Ok, i just came from the parts store and holy ****:eek:. I knew syn oil was expensive but i wasnt expecting $105. All they had was mobil 1. Im going to do some more looking. Big Joe, have you had any problems with your Rotella? I was told that i shouldnt use Rotella in my 6.0 cause of some...
  13. Longcut

    Oil Question Again....

    Thanks for the Reply. Is 15W-40 Dino available in any parts store?
  14. Longcut

    A few Questions..

    Thanks for the info. I think for $300 i can find some other mods i need more though.;tu
  15. Longcut

    A few Questions..

    What is the CCV mod? Can it be done on a 6.0? Can you easily remove the silencer ring on a 04' 6.0? Thanks, Louis
  16. Longcut

    SuperDuty Tow & Transport Pics (What Are You Pulling Out There)

    Tandem Axle, Dual wheel, Gooseneck with 17 bales count?
  17. Longcut

    Question Keyless Entry

    Is there a certain spot under the dash?
  18. Longcut

    Oil Question Again....

    I know from previous posts im going to open up a can of worms here but, I just bought my 6.0 SD a few months ago and i am ready for another oil change. I live in the mid-west so it gets purty cold in the winter. I see that no one has brought up 10W-30, i was told by a Ford dealer that i...
  19. Longcut

    Question Any other simple mods? (example: HighIdleMod)

    Thanks for the link, I appreciate it greatly. High Idle install complete! On to the zoodad next weekend. Is there anything else along those lines that i can do? Any easy fixes to common problems?
  20. Longcut

    Question Keyless Entry

    I just bought my truck a few months ago and it has the keypad on the door but i dont have the code. We had a Taurus and the factory code was in the trunk on the hinge, is there a code hidden somewhere on my SD? Or can anyone tell me what i need to do to get it?
  21. Longcut

    Question Any other simple mods? (example: HighIdleMod)

    :sorry, i thought i already did that. I get confused, I am on too many forums! I just bought my truck about 2 months ago, it is entirely stock as far as motor and drivetrain. No mods period. I'm going to add the High Idle mod as soon as I get a free minute. Is there a link or something...
  22. Longcut

    Question Any other simple mods? (example: HighIdleMod)

    Anyone have any other mods such as the High Idle Mod that thread, please post them here. Anything that is cheap, easy and that is a DIY job. :innocent Or Cheap fixes for common problems?
  23. Longcut

    Question High Idle Kit

    Awesome Mod! I will be doing it this weekend! Whats up with 6.0's and the broken Dipstick?

Members online

No members online now.
Total: 113 (members: 1, guests: 112)

Forum statistics

Threads
30,545
Messages
266,136
Members
14,673
Latest member
Doms350

Latest posts

Top