Search results

  1. f100cleveland

    Question What did you do to your truck today?

    With all the mods you have done it should be a blast to drive.
  2. f100cleveland

    Question 2006 6L Hot Start issue

    There is a service bulletin or something that pertains to a fitting inside the HPOP. You get a couple of brackets that hold in a pipe that works out of place causing hard or no starts. Newer 6.0s had this done at factory and some older ones had recalls but not all were fixed. Might be able to...
  3. f100cleveland

    Question 2006 6L Hot Start issue

    I went through the same thing and had to deal with a dealership as it was under warranty yet. Took them forever to find the problem but ended up being HPOP. Might be that. I know you need at least 500psi to get it to start
  4. f100cleveland

    you know it's a hard winter when...

    Condensation
  5. f100cleveland

    Question Blue spring update on the 6.0

    I did the BB behind the stock spring trick and raised the pressure the same as the blue spring mod. No noticable difference but nice to know injectors aren't being starved for fuel.
  6. f100cleveland

    Whats fuel prices around you?

    Jumped another $0.10 yesterday. Now $3.89. Was a steady $3.69 till this post started. Lol
  7. f100cleveland

    Whats fuel prices around you?

    Was $3.69 but jumped a dime last week to $3.79 plus by the time you add anti-gel it closer to $4
  8. f100cleveland

    Question ZF6 behind my Cummins?!

    My son has an 06 Dodge twin turbo smarty tuned one ton with same tranny. He said newer dodge trans had better OD ratio. Once he tears his up I'm sure that's what he's going to put in. So far its holding up with over 1000flbs torque.
  9. f100cleveland

    truck idled 9 hrs today

    Bet it smoked alittle when you headed for home. At least we have outlets we can get to where I work. Most of the time mine stays at near 100 degrees with the heater plugged in all day but yesterday it read 72. We have had close to -20 with wind chills down to 50-60 below. Glad we didn't gell up.
  10. f100cleveland

    New Member New member, just north of Portland

    It does better. Will drag rear bumper.
  11. f100cleveland

    My Baby's in the shop

    I hope Ford pays for the tow bill. I thought the cleaning was automatic and you didn't have to babysit it.
  12. f100cleveland

    New Member New member, just north of Portland

    Wecome. Is that a Pinto?
  13. f100cleveland

    Recommendations: Looking for Monitor/Tuning solution

    If you are thinking monitoring engine and tuner on your in dash screen I have never seen or heard of that. Backup cam should work in dash. Whats the cold weather option?
  14. f100cleveland

    DEF Pump

    I would think that would be covered under emissions but you are probably over on miles for that to be warrenty.
  15. f100cleveland

    Block heater questions

    No. 1 diesel if you can get it otherwise Howes or power service antigell additive. I carry along some stuff call 911 that is suppost to help out if you start to gell up. My 01 would fire up below zero but it loped and rattled and smoked so bad the truck disappeared.
  16. f100cleveland

    Help Needed Code's and High egt's

    1000 degrees won't hurt it. The 01 I had would run that all day long hauling fairly heavy. I would get high EGT's even empty with Bully Dog products but with good mileage. Every truck seems to like a little different tune or tuner so maybe they can change yours with the info you give them about...
  17. f100cleveland

    tuning up the clevor

    http://www.youtube.com/watch?v=rbWvwW26JoY Usually wait till spring to do a few changes and flog it on the dyno but decided to get it done with while the dyno at Wheeler dyno in Blaine wasn't busy. Picked up a couple horses and a little tq. Ended up with 938hp and 661tq. Hp was pretty...
  18. f100cleveland

    Question Best Ball Joints

    Not to scare you away from NAPA joints but they replaced some on a 2002 F-350 at work and they were so tight you couldn't keep it in your lane. It seemed like it leaped side to side. Replaced them with OEM Ford and everythings good. Ford dealer said it happens, but I'm sure they want you to buy...
  19. f100cleveland

    Whats on your Christmas list?

    My Gorilla 3500lb. winch has worked good on my Arctic Cat 700 so far and the T-Max 9000 I have on my offroad rig works nice for the price. Some remote doors locks for the Super Duty would be nice for Christmas since it never came with them.
  20. f100cleveland

    End of season

    Has a 4 link. We changed it between runs but didn't seem to help. Also took 7 degrees timing out for 1 second to lower power on launch and raised two step rev limiter to within 400 rpms of stall converter to try and make it not hit tires so hard but still wheelied. Did make for a cool photo...
  21. f100cleveland

    End of season

    The drag truck is getting put away for another winters rest. Super Duty's job of pulling it has ended for this year. Now it just has to get me through snow for the next 5-6 months. Couple pics of last race. Was having issues with to much motor and to much traction. Drug rear bumper on second...
  22. f100cleveland

    6.0L Egr removal P0401 P0404

    Wouldn't it work to hook up the EGR but just leave it laying on the motor zip tied off to something?
  23. f100cleveland

    Happy Birthday f100cleveland

    Thanks. Had a good and bad day. Went to one of my best freinds funeral. He hit a deer on his Harley and didn't survive. Was a bikers funeral which was cool but still not expected and sad day. Spent the rest of day with family.
  24. f100cleveland

    Question Power steering

    My 06 had noises and air issues from day one and finally changed out fluid but that didn't help. Found a service manual that had you pull slight vaccum on reservoir cap while working the system. Works great now. 06 might be different than your 03 tho
  25. f100cleveland

    rant Truck Broken Into...........

    Hope they didn't steal anything of value that insurance can't replace. Guess I'm to used to small town rural living and usually don't even take my keys out.

Members online

Total: 881 (members: 8, guests: 873)

Forum statistics

Threads
30,547
Messages
266,142
Members
14,676
Latest member
FlorWhitfe

Latest posts

Top